The Oven

Project World => FAQ & Tutorials => Topic started by: Atari800xl on December 26, 2014, 11:30:56 PM

Title: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 26, 2014, 11:30:56 PM
This topic is mainly for announcing new versions of Disk imaging software
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 26, 2014, 11:31:30 PM
...reserved...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 26, 2014, 11:32:00 PM
...working on this...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 26, 2014, 11:32:51 PM
... reserved ...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on December 27, 2014, 10:08:36 AM
Great Tutorial Atari800xl, thanks  :thumbsup:

Well, you can include Gena as one of favorite PE, pe1 still many peoples favorite PE and Gena is The Only active one  :wink:,
 I know many Disk Imagers still works on Gena  :wink: also I know you only test and use with SE  :wink:
 .... (....further all tested by me on SE .. ;) )


Well Done  :smile:

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 27, 2014, 10:55:50 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on December 27, 2014, 11:03:43 AM
Sure  :thumbsup:

What I meant was exactly what you are wrote,
 What I ask, only add Gena to the list and mention further tested on SE,
  we know they mostly work or can work on Gena (tricky driver adding..), but most naturally not interested in ;)
   and I do not want you to work on this task too, you don't have to, please don't feel you oblige to,
    you are very more interested in SE, keep on   :thumbsup:
      only, do not exclude Gena's existance on such a nice topic  :cool:
       I also don't have time to work on such long tasks, maybe in future oscar   :great:

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: anshad on December 27, 2014, 07:04:05 PM
There is no doubt that disk imaging apps are the most widely used plugins on recovery discs. It's nice to see all of them in one place. Keep up the good job mate  :thumbsup:.

Quote
Well, you can include Gena as one of favorite PE, pe1 still many peoples favorite PE and Gena is The Only active one


Some legacy apps will only work properly on PE 1. One particular example is "Victoria" (HDD diagnostics). Some of it's functions won't work in PE3/PE4 environments. Since disk diagnostic is one thing i have to do daily in my line of work, Gena is  Indispensable for me.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 28, 2014, 03:44:50 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: anshad on December 28, 2014, 04:46:50 AM
Quote
Kinda funny you mention disk related tasks, because I remember one of the reasons I left Gena behind [for a while] was that XP disk management had some trouble with my multiboot setup. I'd have to look up some notes to see what the exact problem was, but I'm sure you can tell me how Gena performs in that respect. Have you run into that problem as well? Do you use third party HD managers?

Yes, there are known issues with "PE 1" disk management. You can delete partitions but you won't be able to create and format new ones. You will receive  some sort of error message which i don't exactly remember. Also WinXP by default doesn't have support for GPT disks ( there is a workaround by using "disk.sys" from 2003 server ).

As Lancelot said in http://theoven.org/index.php?topic=1143.msg13222#msg13222, use Server 2003 SP2 as source and disable "Small Core build" to enable full file copy. This will make "Disk management" fully working and improve compatibility with newer hardwares - including GPT disks. However i strongly recommend to use "Partition Wizard" for disk management functions as it is very reliable and feature rich in my opinion. I have did countless convert/resize operations with it and always worked like a charm.

 
Quote
If you find the time, maybe you can share some details on which particular tasks only Gena (and Victoria) can do?


"Victoria" requires direct access to the disk bypassing OS API. The driver which enables direct disk access is written at XP times and thus works fine on PE 1. All functions of Victoria including bad sector remapping fully functional on Gena. But on PE3 and 4/5, remap operation doesn't seems to work. I don't recommend to fix bad sectors and reuse a hard drive but just mentioned it as an example.

One other reason i still use Gena is it's small size. It fits nicely on a CD and boots fast.  I still encounters machines which doesn't have USB boot function in my line of work. Usually i use my Gena CD on that systems for repair and recovery.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on December 28, 2014, 06:16:23 AM
Yes, there are known issues with "PE 1" disk management. You can delete partitions but you won't be able to create and format new ones. You will receive  some sort of error message which i don't exactly remember. Also WinXP by default doesn't have support for GPT disks ( there is a workaround by using "disk.sys" from 2003 server )
What anshad means with Windows DiskManagement, MMC plugin was default selected false for such reasons ;)
I just update mmc to only disable diskmanagement  :wink: (to force using 3rd party ;))

all results from anshad here at reply 38 http://theoven.org/index.php?topic=526.msg10991#msg10991

As Lancelot said in http://theoven.org/index.php?topic=1143.msg13222#msg13222, use Server 2003 SP2 as source and disable "Small Core build" to enable full file copy.
well, maybe no need to disable "Small Core build" anymore !?!

I just update dps and add new dps nightlies, selected default,
during tests I figure out new dps nightlies packages need drivers by Removable Devices Combo (which also comes from big build !?!)

Now Gena default build see my harddrive out of box  :grin: :tongue: (small build, xp/2k3 , xp needs Gena\Drivers\4 Storage\GPTSupport XP 32bit (disk.sys)  )
 Thanks to dps guys  :cool:

one thing missed, I can not get usb sticks work, they need to be formatted  :grin: (big/small ,during boot, 2k3/sp, all result same)
 well, accessing harddrive has top priority, I can live with that  :cool:

ps: on dps plugin, when changing packages, since dps plugin uses latest dps .7z, there is now "delete dps path" ;) , will be improved later by Galapo to follow scrollbox....

maybe now Gena can get disk access to other modern devices like Atari800xl have ;) at least condition is better than old stable package  :cool:

further test results on Gena with latest dps nightlies better here http://theoven.org/index.php?topic=526

anyway, now Gena default back on Disk Imager game  :lol:

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on January 02, 2015, 02:08:59 AM
Just an update,

one thing missed, I can not get usb sticks work, they need to be formatted  :grin: (big/small ,during boot, 2k3/sp, all result same)
 well, accessing harddrive has top priority, I can live with that  :cool:
it was my fault,
after adding exfat plugin, usb sticks work  :thumbsup:
only a usb3 stick can not get drive letter automatically, MountStorPE fix that  :thumbsup:
   (mentioned before here http://theoven.org/index.php?topic=526.msg13252#msg13252 just re testet )
      I add MountStorePE to desktop as default  :wink: aside adding new device letters, it adds letters to hidden ones, very useful  :wink:

further dps nightlies integration to Gena finished  :thumbsup: All disks ok with my latest hardwares  :great:

Gena seems to continue some more years operational on new devices ...

See You
:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on January 02, 2015, 04:36:38 PM
Hi Atari,
I just finished a couple of script thanks to the help of Lancelot and wanted to share. :thumbsup:
Introduction

This topic is mainly for announcing new versions of Disk imaging software ("imagers"), that can be built into your favorite PE (Using a "special" PE project from TheOven.org, of course).
It is also for sharing tips on where you can find ready-made scripts to do the work for you, and for going "behind the scenes" a bit, to see how those scripts actually work: which files are needed to make the imagers work in PE ("dependencies"), are extra drivers needed, what has changed between versions, etc.

- Terabyte Image for Windows (same)
Since the Plugin with File Container is larger I have posted a link to that file.  Just remember
put the Plugin with File Container with the script you are using in the same folder.  Something
like Projects\Win8.1SE\Apps\HD Tasks\Imaging\TeraByte.Script. The links are

http://theoven.org/index.php?topic=1290.msg15018#msg15018
Enjoy..... :vacuum:
 :great:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 02, 2015, 08:56:37 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 02, 2015, 09:44:05 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 03, 2015, 12:10:00 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on January 03, 2015, 12:29:26 AM
Hi Atari800xl,


EDIT: I was thinking a bit about your Terabyte Image script, the fact that you can't share the files, and the license key needed to make it run. Maybe you can make a new script, like others have done for Acronis/ Macrium etc, that takes the original download, then extract it, copy the needed files for PE, and add some GUI elements to add the license info?
The official download is here: http://www.terabyteunlimited.com/downloads/ifw_en_ifdgui_trial.exe
it's only a 14mb download and all files can be easily extracted with innounp.

Mark is new around, no need to force him do complex thing.


Better you create such a plugin,
 use provide file kind plugin, add a "License" and add a "Download" button to download and extract to provide file folder
  as a tip, at "PC Provide Files" check [Download_Files] and related sections
    result may demonstrate Mark a nice example. :thumbsup:

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 04, 2015, 08:19:40 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 04, 2015, 08:25:31 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on January 04, 2015, 08:29:20 AM
You seem to be a good searcher on net,

Maybe you can find a dps-x64 (or similar ;)) for Gena-x64

no idea about ghost32 12 except wiki ;)

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 07, 2015, 10:33:30 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: JFX on January 08, 2015, 08:34:36 AM
For command line user ShadowProtect can be reduces to just 2 files.
SbRun.exe and stcsnap.dll (or stcsna64.dll if you use x64 version)

That makes ShadowProtect winning, with fastest restore time and smallest program size :grin:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 08, 2015, 09:08:59 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: JFX on January 08, 2015, 08:59:20 PM
Yes, I use ShadowProtect myself. The command line is a bit uneasy, but the GUI version display the command line for the used task.
So the only problem is that it want a volume name (the one you can get from mountvol.exe) and not a simple drive letter.

Actually the lack of command line support in Acronis pushed me to change to StorageCraft.

Not sure what's your problem with Aomei Backupper?
Works here, copied the 3 .sys in system32 and run Loaddrv.exe.

Loaddrv writes this UpperFilters value and Backupper the other 2.
What happens if you run the setup inside PE?
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 02:33:21 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 03:01:18 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 08:14:21 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: JFX on January 09, 2015, 08:51:55 AM
Just wait what Aomei support says about registration of a freeware  :confused:

Don't know if I install it in WinPE x64, system get's instable  :blink:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 09, 2015, 08:58:34 AM
Where did you get 64bit LoadDrv.exe ? I haven't got one of those in Backupper.


Not sure why you are having difficulty.

I copy the 3 sys files to mount\system32 ( or Target\system32 - whatever you are using for that ), and the contents of the AOMEI\WINPE64 folder to mount\program files\aomei.

I also copy amcore.dll from AOMEI folder to  mount\program files\aomei. Just a small reg entry. Job done.

Code: [Select]
[HKEY_LOCAL_MACHINE\PE_SYS\ControlSet001\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}]
"UpperFilters"=hex(7):61,00,6d,00,62,00,61,00,6b,00,64,00,72,00,76,00,00,00,00,\
  00

[HKEY_LOCAL_MACHINE\PE_SYS\ControlSet001\Services]

[HKEY_LOCAL_MACHINE\PE_SYS\ControlSet001\Services\ambakdrv]
"DisplayName"="ambakdrv"
"ErrorControl"=dword:00000000
"ImagePath"=hex(2):5c,00,3f,00,3f,00,5c,00,58,00,3a,00,5c,00,77,00,69,00,6e,00,\
  64,00,6f,00,77,00,73,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,\
  00,5c,00,61,00,6d,00,62,00,61,00,6b,00,64,00,72,00,76,00,2e,00,73,00,79,00,\
  73,00,00,00
"Start"=dword:00000002
"Type"=dword:00000001
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 09:25:51 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 09:45:24 AM
...
Just trying to learn here...  :embarrassed:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 10:00:06 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 09, 2015, 01:08:40 PM
Yes , I expect you could use similar to create the service for Aomei. Haven't needed to try it though.

Code: [Select]
Reg.exe add "HKLM\PE_SYS\ControlSet001\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}" /v "UpperFilters" /t REG_MULTI_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "DisplayName" /t REG_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "ErrorControl" /t REG_DWORD /d "0" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "ImagePath" /t REG_EXPAND_SZ /d "\??\X:\windows\system32\ambakdrv.sys" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "Start" /t REG_DWORD /d "2" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "Type" /t REG_DWORD /d "1" /f
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: gbrao on January 09, 2015, 06:40:16 PM
Yes, I use ShadowProtect myself. The command line is a bit uneasy, but the GUI version display the command line for the used task.
So the only problem is that it want a volume name (the one you can get from mountvol.exe) and not a simple drive letter.

Could you please share one of the SProtect cmd/scripts (as an example) ?
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 08:11:35 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 09, 2015, 08:36:54 PM
You don't need msahci.sys. Not sure why it is there - maybe for pe2.

demand is start type 3
auto is start type 2

sc create ambakdrv  type= kernel start= auto binpath= "system32\ambakdrv.sys"
net start ambakdrv
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 09:02:24 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 09, 2015, 09:26:47 PM
I wouldn't put msahci in, it is the win7 version. Win8 already has it ( so does 7 so no idea what it is doing there).

You don't need to start the other linked drivers. Backupper will do that as soon as you fire it up.

Don't worry about the message, it works perfectly. You can test by mounting an .adi image.

If you want to get really fancy, you can copy adi.ico to Program Files\aomei as well and it makes the .adi images look pretty.

Code: [Select]
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File\DefaultIcon" /ve /t REG_SZ /d "X:\Program Files\AOMEI\adi.ico" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.adi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.afi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f

Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 09:50:32 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 09, 2015, 10:10:35 PM
It works for me:

Code: [Select]
@Echo Off
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File\DefaultIcon" /ve /t REG_SZ /d "X:\Program Files\AOMEI\adi.ico" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.adi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.afi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f

Reg.exe add "HKLM\SYSTEM\ControlSet001\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}" /v "UpperFilters" /t REG_MULTI_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "DisplayName" /t REG_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "ErrorControl" /t REG_DWORD /d "0" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "ImagePath" /t REG_EXPAND_SZ /d "\??\X:\windows\system32\ambakdrv.sys" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "Start" /t REG_DWORD /d "2" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "Type" /t REG_DWORD /d "1" /f

sc create ambakdrv  type= kernel start= auto binpath= "system32\ambakdrv.sys"
net start ambakdrv
PAUSE
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 09, 2015, 10:30:37 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 10, 2015, 11:43:03 AM
You are right. I just checked again, and mounting works fine, but creating backup images depends on ambakdrv.

Loadrv.exe should be able to do it. I don't know what commands the installer gives it.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 10, 2015, 08:19:30 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on January 11, 2015, 04:39:42 PM
64 bit files are included so it can create 64 bit pe.

What you are trying to do was never the intention and is unsupported.

If I get a chance I may ask what the Ldrv commands are.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 11, 2015, 10:11:02 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 13, 2015, 09:57:07 AM
There was a nice reply to my questions from a moderator on the Aomei forum today:
Quote
I must say there are problems indeedly with Backupper if you want to run it in a third-party 64-bit WinPE, currently there are many relatively complicated operations needed to do if you want to add Backupper to WinPE yourself maunally.  We will release a PE edition of Backupper in the future.
The file AmCore.dll, we will modify it in future versions, please keep an eye on our updates. Thank you very much for your attention to our Backupper.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 23, 2015, 09:13:33 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on February 08, 2015, 09:10:55 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on February 08, 2015, 09:54:55 AM
Hi Lancelot,
The first Macrium 6 versions are also becoming available. For example: Home version, 32bit:
http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=0&type=0&arch=0&redirect=Y (http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=0&type=0&arch=0&redirect=Y)
Change "arch" to 1 for 64 bit
Change "type" to 1 for Workstation, 2 for Server, 3 for Server plus.
http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=2&type=0&arch=0&redirect=Y
I changed the" type" to 2 and the link doesn't work. Is there something that I am doing wrong?
Or is it that they have not posted anything but the Home Version yet? Thanks for the help.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on February 08, 2015, 10:00:06 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on February 08, 2015, 10:20:09 AM
type=2 works (Server version):

http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=0&type=2&arch=0&redirect=Y (http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=0&type=2&arch=0&redirect=Y)

Mark, you changed "edition", instead of "type"!!!
http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=0&type=2&arch=0&redirect=Y
http://updates.macrium.com/Reflect/v6/getmsi.asp?edition=0&type=2&arch=1&redirect=Y
Thank, Got it.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on February 08, 2015, 09:36:51 PM
Hi Atari800xl,
The first Macrium 6 versions are also becoming available.
Just updated my script and files for new version. Hope this helps out someone.  :thumbsup:

http://theoven.org/index.php?topic=686.msg21215#msg21215
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on February 11, 2015, 09:54:40 AM
Just updated my script and files for AOMEI Backupper Standard 3.1 .  Tested in x86 and x64 build.
http://theoven.org/index.php?topic=1296.msg15009#msg15009   :thumbsup:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on February 11, 2015, 11:54:00 AM
There is a file in LOG folder called reg.log. Looks like Cantonese, but I can't make sense of it.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on February 23, 2015, 05:53:04 AM
IFW 2.94

For Info
when you have the full Terabyte Image for Windows installed on your client, it has it's own PE Builder plugin installer,
which you run and point at your PE apps folder and it generates this script which has always worked  perfectly for me.
I appreciate you need the program installed in the first place, but the script might help somebody

Code: [Select]
[main]
Title=Image for Windows
Description=TeraByte Unlimited
Selected=True
Level=5
Version=002
Download_Level=0
NoWarning=False

[variables]
%ProgramTitle%=Image for Windows
%ProgramEXE%=imagew.exe
%ProgramFolder%=HD Tasks\Imaging\IFW

[Interface]
pCheckBox1="Start IFW Automatically",1,3,10,39,200,18,False
pCheckBox2="Add IFW Shortcut To Desktop",1,3,10,60,200,18,False
pCheckBox3="Add IFW Shortcut To Quick Launch",1,3,10,81,200,18,True
pCheckBox4="Run from RAM (boot.wim) - Recommended",1,3,10,102,264,18,True
pBevel1=pBevel1,1,12,10,133,273,105
pTextLabel1="Include Optional Programs",1,1,18,140,230,18,8,Bold
pCheckBox5=TBIView,1,3,37,166,200,18,True
pCheckBox6=TBIMount,1,3,37,190,200,18,True
pCheckBox7=TBOSDT,1,3,37,212,200,18,True

[TBIView]
If,EXISTFILE,"%ScriptDir%\tbiview.exe",Run,%ScriptFile%,TBIView_Process

[TBIView_Process]
FileCopy,"%ScriptDir%\tbiview.exe","%Target_Prog%\%ProgramFolder%\"
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW",%PE_Programs%\%ProgramFolder%\tbiview.exe,TBIView

[TBIMount]
If,EXISTFILE,"%ScriptDir%\tbimount.exe",Begin
  If,EXISTFILE,"%ScriptDir%\tbimount.sys",Run,%ScriptFile%,TBIMount_Process
End

[TBIMount_Process]
FileCopy,"%ScriptDir%\tbimount.exe","%Target_Prog%\%ProgramFolder%\"
FileCopy,"%ScriptDir%\tbimount.sys","%TargetDir%\Windows\System32\Drivers"
Hive_Load,HKLM
Reg_Add,0x4,"%reg%\ControlSet001\Services\TBIMount","Type","1"
Reg_Add,0x4,"%reg%\ControlSet001\Services\TBIMount","Start","3"
Reg_Add,0x4,"%reg%\ControlSet001\Services\TBIMount","ErrorControl","1"
Reg_Add,0x1,"%reg%\ControlSet001\Services\TBIMount","DisplayName","TBIMount"
Reg_Add,0x1,"%reg%\ControlSet001\Services\TBIMount","ImagePath","system32\drivers\tbimount.sys"
Hive_Unload
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW",%PE_Programs%\%ProgramFolder%\tbimount.exe,TBIMount

[TBOSDT]
DirMake,"%Target_Prog%\%ProgramFolder%\tbosdt"
DirCopy,"%ScriptDir%\tbosdt\*.*","%Target_Prog%\%ProgramFolder%\tbosdt"
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW",%PE_Programs%\%ProgramFolder%\tbosdt\tbosdtw.exe,TBOSDT

[process]
RunFromRam,%pCheckBox4%
DirMake,"%Target_Prog%\%ProgramFolder%\"
FileCopy,"%ScriptDir%\imagew.exe","%Target_Prog%\%ProgramFolder%\"
// -- Copy optional files
If,EXISTFILE,"%ScriptDir%\imagew.ini",FileCopy,"%ScriptDir%\imagew.ini","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\cdboot.f35",FileCopy,"%ScriptDir%\cdboot.f35","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\cdboot.ifd",FileCopy,"%ScriptDir%\cdboot.ifd","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\IFW.INI",FileCopy,"%ScriptDir%\IFW.INI","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\ifwlang.dll",FileCopy,"%ScriptDir%\ifwlang.dll","%Target_Prog%\%ProgramFolder%\"
// -- Process options and shortcuts
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW"
If,%pCheckBox1%,Equal,True,AddAutoRun,"Image for Windows","imagew.exe","",2
If,%pCheckBox2%,Equal,True,Add_Shortcut,Desktop
If,%pCheckBox3%,Equal,True,Add_Shortcut,QuickLaunch
If,%pCheckBox5%,Equal,True,Run,%ScriptFile%,TBIView
If,%pCheckBox6%,Equal,True,Run,%ScriptFile%,TBIMount
If,%pCheckBox7%,Equal,True,Run,%ScriptFile%,TBOSDT

the identical script has worked in the last five or six update versions of IFW on the win 8.1se/win8pe se and win7pe se projects
that i use it with.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on February 23, 2015, 11:53:46 AM
IFW 2.94

For Info
when you have the full Terabyte Image for Windows installed on your client, it has it's own PE Builder plugin installer,
which you run and point at your PE apps folder and it generates this script which has always worked  perfectly for me.
I appreciate you need the program installed in the first place, but the script might help somebody
Code: [Select]
[main]
Title=Image for Windows
Description=TeraByte Unlimited
Selected=True
Level=5
Version=002
Download_Level=0
NoWarning=False

[variables]
%ProgramTitle%=Image for Windows
%ProgramEXE%=imagew.exe
%ProgramFolder%=HD Tasks\Imaging\IFW

[Interface]
pCheckBox1="Start IFW Automatically",1,3,10,39,200,18,False
pCheckBox2="Add IFW Shortcut To Desktop",1,3,10,60,200,18,False
pCheckBox3="Add IFW Shortcut To Quick Launch",1,3,10,81,200,18,True
pCheckBox4="Run from RAM (boot.wim) - Recommended",1,3,10,102,264,18,True
pBevel1=pBevel1,1,12,10,133,273,105
pTextLabel1="Include Optional Programs",1,1,18,140,230,18,8,Bold
pCheckBox5=TBIView,1,3,37,166,200,18,True
pCheckBox6=TBIMount,1,3,37,190,200,18,True
pCheckBox7=TBOSDT,1,3,37,212,200,18,True

[TBIView]
If,EXISTFILE,"%ScriptDir%\tbiview.exe",Run,%ScriptFile%,TBIView_Process

[TBIView_Process]
FileCopy,"%ScriptDir%\tbiview.exe","%Target_Prog%\%ProgramFolder%\"
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW",%PE_Programs%\%ProgramFolder%\tbiview.exe,TBIView

[TBIMount]
If,EXISTFILE,"%ScriptDir%\tbimount.exe",Begin
  If,EXISTFILE,"%ScriptDir%\tbimount.sys",Run,%ScriptFile%,TBIMount_Process
End

[TBIMount_Process]
FileCopy,"%ScriptDir%\tbimount.exe","%Target_Prog%\%ProgramFolder%\"
FileCopy,"%ScriptDir%\tbimount.sys","%TargetDir%\Windows\System32\Drivers"
Hive_Load,HKLM
Reg_Add,0x4,"%reg%\ControlSet001\Services\TBIMount","Type","1"
Reg_Add,0x4,"%reg%\ControlSet001\Services\TBIMount","Start","3"
Reg_Add,0x4,"%reg%\ControlSet001\Services\TBIMount","ErrorControl","1"
Reg_Add,0x1,"%reg%\ControlSet001\Services\TBIMount","DisplayName","TBIMount"
Reg_Add,0x1,"%reg%\ControlSet001\Services\TBIMount","ImagePath","system32\drivers\tbimount.sys"
Hive_Unload
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW",%PE_Programs%\%ProgramFolder%\tbimount.exe,TBIMount

[TBOSDT]
DirMake,"%Target_Prog%\%ProgramFolder%\tbosdt"
DirCopy,"%ScriptDir%\tbosdt\*.*","%Target_Prog%\%ProgramFolder%\tbosdt"
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW",%PE_Programs%\%ProgramFolder%\tbosdt\tbosdtw.exe,TBOSDT

[process]
RunFromRam,%pCheckBox4%
DirMake,"%Target_Prog%\%ProgramFolder%\"
FileCopy,"%ScriptDir%\imagew.exe","%Target_Prog%\%ProgramFolder%\"
// -- Copy optional files
If,EXISTFILE,"%ScriptDir%\imagew.ini",FileCopy,"%ScriptDir%\imagew.ini","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\cdboot.f35",FileCopy,"%ScriptDir%\cdboot.f35","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\cdboot.ifd",FileCopy,"%ScriptDir%\cdboot.ifd","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\IFW.INI",FileCopy,"%ScriptDir%\IFW.INI","%Target_Prog%\%ProgramFolder%\"
If,EXISTFILE,"%ScriptDir%\ifwlang.dll",FileCopy,"%ScriptDir%\ifwlang.dll","%Target_Prog%\%ProgramFolder%\"
// -- Process options and shortcuts
Add_Shortcut,StartMenu,"HD Tasks\Imaging\IFW"
If,%pCheckBox1%,Equal,True,AddAutoRun,"Image for Windows","imagew.exe","",2
If,%pCheckBox2%,Equal,True,Add_Shortcut,Desktop
If,%pCheckBox3%,Equal,True,Add_Shortcut,QuickLaunch
If,%pCheckBox5%,Equal,True,Run,%ScriptFile%,TBIView
If,%pCheckBox6%,Equal,True,Run,%ScriptFile%,TBIMount
If,%pCheckBox7%,Equal,True,Run,%ScriptFile%,TBOSDT

the identical script has worked in the last five or six update versions of IFW on the win 8.1se/win8pe se and win7pe se projects
that i use it with.
I was able to add a few things to my script. I place the script in this folder
Win8.1SE\Projects\MyPlugins_Direct\Apps\HD Tasks\Imaging

http://theoven.org/index.php?topic=1290.msg15018#msg15018
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on February 23, 2015, 12:07:07 PM
the identical script has worked in the last five or six update versions of IFW on the win 8.1se/win8pe se and win7pe se projects
that i use it with.

Hi APT,

just looking codes, well it would never work "perfect" with win 8.1se/win8pe se with default builder settings,
 registry lines are wrong and should give error (depricated years ago) , some lines should not work, and some lines "ugly" (did not check)....

use Mark's plugin



@Mark,

Mark, you are faster than me,
I could not find topic of your plugin (I had in my folder), can you create one with
Contact=??????????????????????
pWebLabel2="Plugin Page",1,10,20,267,200,18,??????????????????????
 :wink:

things noticed:
at [Launch_Program] you can use
Call,HostOSArch
to launch x86/x64  :wink:
+
you can see some code examples wiith Utils\Provide Files - multiarch .......

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on February 23, 2015, 12:33:12 PM
Lancelot

I'd hate to disagree with a baker of your calibre  :worship: :worship:
but that is the exact script created by the IFW program direct  onto my Win81PESE and has worked many times in a real life backup and restore
never having had a single error  :confused:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on February 23, 2015, 12:51:45 PM
Hi APT,

I believe, it is the success of application since it has a portable soul  :wink:
 as a result,
  plugin* they offer do not fully work ok, you can see errors/warnings about this plugin* (not application*) on builder log when you build,
  but since files copied correctly by that plugin, application* works following its portable soul  :wink:
   (maybe some options you do not use not work !!!! ;) , I don't use terabyte   :wink: )

shortly: plugin not fully ok - application ok since it is copied by that plugin


well, using Mark plugin would be better since:
 + it follows that plugin + adds .TBI assocation + adds x64 support + and probably other things   :thumbsup:

**
ps: you can test plugins by using green play button
See: FAQ http://theoven.org/index.php?topic=834.0
Q: How to use / test plugin after build ? (green play etc.)

and check log....

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on April 17, 2015, 07:29:23 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on May 13, 2015, 09:38:19 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on May 16, 2015, 02:20:27 PM
I have created a script for Active@ Disk Image for Windows
Version 7.0.2 - May 12, 2015
Here is the link for
http://theoven.org/index.php?topic=1293.msg15006#msg15006
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on May 23, 2015, 05:52:07 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on May 25, 2015, 12:55:47 PM
New version: Terabyte Image for Windows
Version 2.96 - May 22, 2015
Here is a link for downloadable script

http://theoven.org/index.php?topic=1290.msg15018#msg15018
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on May 28, 2015, 08:56:20 AM
AOMEI Backupper is up to  version 2.8.0.0
Quote
Version 2.8 (Released 2015-05-11)
Added file sync: synchronize files and folders automatically with a schedule to local disks,
external hard drives, removable USB flash drives, NAS or network shared folders.
Linux bootable media support to restore/clone between UEFI-based GPT disk and BIOS-based MBR disk.
Fixed bug: restore file backup images from CD/DVD with error code 4099.
Fixed some crashing issues.

Modified the original AOMEI Backupper script
http://theoven.org/index.php?topic=1296.20
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on May 31, 2015, 02:12:44 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on June 03, 2015, 06:03:30 AM
Terabyte Image for Windows

Version 2.96 - May 22, 2015
- Added /nowait option (must be first) to allow multiple instances (special use)
- Changed installer for new installs to ask if simple operations should be used
- Added copy to simple operations
- Added new VSS options and changed defaults
- Other potential changes, updates and enhancements

Use the latest script  http://theoven.org/index.php?topic=1290.msg15018#msg15018
Added languages German,Spanish,French,Hungarian,Italian,
Netherlands,Polish,Portuguese,Russian and Chinese to script
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on June 05, 2015, 07:45:03 AM
Was able to combine Active Partition to Active@ Disk Image for Windows
They use many of the same files from Active Disk Image in
Active Partition.  If you uncheck the box Partition in the script it will
not install the addition script.  Download link is below.  :thumbsup:
http://theoven.org/index.php?topic=1293.msg15041#msg15041
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on June 11, 2015, 06:13:14 PM
Introduction

This topic is mainly for announcing new versions of Disk imaging software ("imagers"), that can be built into your favorite PE (Using a "special" PE project from TheOven.org, of course).
It is also for sharing tips on where you can find ready-made scripts to do the work for you, and for going "behind the scenes" a bit, to see how those scripts actually work: which files are needed to make the imagers work in PE ("dependencies"), are extra drivers needed, what has changed between versions, etc.

Here's a list of my favorite imagers. The list might not be completely updated at this moment, but I will try to update it as frequently as I can:

- Acronis True Image (fast and creates small backup images)
- Terabyte Image for Windows (same)
- Macrium Reflect (slightly larger images, bit slower, but free and works great)
- Drive Snapshot (fast, small images)
- Aomei Backupper (free, fast)
- Storagecraft Shadowprotect
- Paragon Hard Disk Manager
- Active@ Disk Image (free)

Why so many? Because people often have picked their favorite already, so I'd like to keep the selection open to your own taste. Also, some are free, so you may want to test one of those as well. It's all about choice.

Current versions
(date coded YYYYMMDD)

- Acronis True Image 2015 18.0.0.6525 20141127
- Terabyte Image 2.93 20141217
- Macrium Reflect 5.3.7256 20141223
- Drive snapshot 1.43.0.17413/17414 20141215
- Aomei Backupper 2.2.0.0 201412224
- StorageCraft ShadowProtect 5.2.2.2 20141212
- Paragon Hard Disk Manager 15 10.1.25.294 20140915 (*new version exists)
- Active@ Disk Image 6.0.3.0 20141020 (part of "Data Studio")

Comparison

Comparing imagers is very hard, because everybody uses them differently (backup to harddisk, usb3, usb2 or even DVD or CD).
I will make a backup of a small OS partition (XP) to an external USB2 external hard drive, which will hopefully give you some idea of how they perform. The size of the resulting backup can also be an indication of their porformance. I will only use standard compression options.
The speed and backup size of Acronis is set to 100%, the others are listed relatively to Acronis.

Speed:
Acronis=100% (smaller is better): Snapshot 97%, Active@ 110%, Terabyte 115%, Aomei 117%, Macrium 210%

Size:
Acronis=100% (smaller is better): Snapshot 97%, Terabyte 101%, Aomei 115%, Active@ 121%, Macrium 177%

changelog: 20141227 First version (not completed until 20141228)
What is the difference between Acronis True Image & Acronis Backup 11.5?
I read the spec's but if someone has used both maybe a little insight.
Thanks for any update
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 17, 2015, 06:08:51 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 25, 2015, 05:51:25 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: xman charl on June 26, 2015, 07:42:27 PM
acronis winpe is a good learning experience for building images, aik, adk.

Sure helped me.

Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 26, 2015, 11:41:51 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: xman charl on June 29, 2015, 06:02:27 PM
Have used acronis 11, arcronis 13. Problems with their 13 version, winpe.
Used grub os to run 13.
Passed on version 14.
Have used version 15, several flaws in this version.
A flaw?.... some activation keyer will be messed up, when
a restore is made. Office will be un-activated, what up with that?

Generally these acronis winpe builds helped go on to build, win7 and win8.1 isos.

Add drivers, packages, to install.wim.

Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on July 05, 2015, 07:48:24 AM
New version: Terabyte Image for Windows

    Version 2.97a - July 4, 2015
    Increased maximim open file handle count for file (Direct) options.
    Disable "Write Changed Sectors Only" option when the drive can be contacted and indicates it cannot reliable use this option.
    Other potential changes, updates and enhancements.

    Version 2.97 - June 15, 2015
    Added /vblba (VoldBPBLBA) option to force LBA of volume to BPB instead of normal LLBA offset from EBR.
    Added /geoav (GlobalGeoAlignVal) and /av (AlignVal) options for user defined custom alignment (use byte value).
    Changed message on simple restore when no backups found with more details for users who created recovery media in wrong mode.
    Other potential changes, updates and enhancements.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on July 25, 2015, 09:43:55 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on August 10, 2015, 01:14:46 AM
    Image for Windows  Version 2.97d - August 9, 2015
    Fix 2.97c regression which could cause and erroneous prompt for file #1.
    Other potential changes, updates and enhancements.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 17, 2015, 06:12:40 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: KYHI on August 17, 2015, 08:00:55 AM
registered for the Beta program > http://www.acronis.com/en-us/homecomputing/trueimage/beta/2016.html
Installed Acronis 2016 > http://dl.acronis.com/s/AcronisTrueImage2016.exe
Signed in to Acronis 2016 with the account I created
And here is the results

edit: C/P Acronis Forums
As for beta serial numbers, please keep in mind that they will be deactivated once we officially close beta campaign.
More information about Acronis True Image 2016 licensing you can find in this article: https://kb.acronis.com/content/56550
Thank you,
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 17, 2015, 09:33:34 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on August 18, 2015, 11:18:51 AM
Hi Atari800xl,

Have you tested Active@ Partition Manager (currently v5) backup disk/partition capabilities...

It is my super portable big app without any .sys ;) , I just updated plugin and it works with no requirements even on a minimal Gena.

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 18, 2015, 06:54:32 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 27, 2015, 08:39:02 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 29, 2015, 08:58:23 AM
Another new build today (5586)
Media addons (same link as before):
http://dl.acronis.com/s/AcronisTrueImage2016_addons.exe

Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on August 29, 2015, 11:51:41 AM
TeraByte Image for Windows

    Version 2.97e - August 29, 2015
    Fix 2.97c regression which could cause and erroneous prompt for file #1.
    Correct issue with large sector size drive when using phylock.
    Other potential changes, updates and enhancements
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on September 05, 2015, 10:35:13 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on September 05, 2015, 11:19:09 PM
I'm sure there are Ghost fans around here (Enterprise/ Corporate ".exe" version, not Consumer), why not have some fun with the latest version (thanks to the good folks @MDL):
Thanks Atari800xl,

I will sure test when I find time  :smile:

btw, I test AcronisTI link you gave recently, added your notes to AcronisTI plugin  :thumbsup:
so I guess (I may read somewhere) no more AcronisTI x86 anymore ??? or only plugin repository don't contain.

:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on September 06, 2015, 12:14:58 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on September 08, 2015, 02:03:10 PM
Fun with Imagers, part 353:
(or use 7zip, "open inside", then extract and examine the 2 large .cab files, extract them, have some fun guessing which file needs renaming to ".exe", you can guess by filesize: around 4mb for 32bit, around 8mb for 64bit).
- This will give you all the files you need, eg. ghost32.exe, ghost64.exe, ghost explorer, etc.
- Version info: 12.0.0.8010, datecode 20150807 (or 20150817?), pretty new, that's my point...
This a great write up!!! I downloaded Lancelot script @
http://yomi.cwcodes.net/Yomi/AppY/HD%20Tasks/Imaging/Ghost_Lance.script
I see he has some scripting about ghostsrv64.exe?
Code: [Select]
Set,%GhostSrv%,ghostsrv.exe
If,%sourcearch%,Equal,x64,If,ExistFile,%ProvideFiles%\ghostsrv64.exe,Set,%GhostExp%,ghostsrv64.exe
I was able to find ghostsrv.exe but not ghostsrv64.exe?
I did rename all the files with .exe but a lot of them are made
to run in the comand prompt.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on September 08, 2015, 05:26:20 PM
Hi Prz42,

no there is no ghostsrv64.exe inside ghost package Atari800xl provided,
I put that line there to get plugin ready for such condition if happens in future, that is all  :wink:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 02, 2015, 05:36:38 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 02, 2015, 06:30:07 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: KYHI on December 02, 2015, 07:05:26 AM
See if you get a Unsigned Driver Error - when boot UEFI or UEFI/SecureBoot
snapman.sys 4.7.0.2463 (was 4.7.0.2447)

Snapman.sys has always caused this error, when not booted using legacy support and PE..
although the driver is clearly signed

[attach=1]
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 02, 2015, 07:38:08 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on December 02, 2015, 10:10:32 PM
No problem here, on real computer with ATI 2016 build 6027 and UEFI/Secure Boot.
However, no idea what's wrong for you Kyhi.

[attach=1]
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on December 02, 2015, 10:10:55 PM
See if you get a Unsigned Driver Error - when boot UEFI or UEFI/SecureBoot
snapman.sys 4.7.0.2463 (was 4.7.0.2447)

Thanks for mentioning this issue!
Unfortunately, I don't have UEFI hardware to test this on at the moment, I will have to wait until I get a "fixer" computer to do that.
Can you upload snapapi.dll (4.7.0.2463) for 32 bit system? :D
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on December 02, 2015, 10:19:43 PM
Since ATI 2015, and now ATI 2016, there are no 32-bit version available in AcronisTrueImage_addons.
Maybe it exists in another Acronis product.

Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on December 02, 2015, 10:26:53 PM
Since ATI 2015, and now ATI 2016, there are no 32-bit version available in AcronisTrueImage_addons.
Maybe it exists in another Acronis product.
Only need snapapi.dll. If you run ATI2016 on 32 bit system, you will get snapman.sys, snapapi.dll, fltsrv.dll for 32 bit. Other way, unpack ATI setup file and get it.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on December 03, 2015, 12:44:26 AM
 :thumbsup:
I did not download the setup, yet. I just use the unpack addon pakage on my side.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on December 03, 2015, 03:17:56 PM
:thumbsup:
I did not download the setup, yet. I just use the unpack addon pakage on my side.
500Mb download and get 400kb for dll.  :cool:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on December 29, 2015, 09:16:19 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on December 30, 2015, 01:34:50 PM
New Disk Director 12 build!
data1.cab, open, extract _1EF96864D30AB5E656CF870A12958C25, rename to pe.zip
Is the file _EC97B386F64AE733BCF057F0D20926AA, the one we rename to WinPE32.zip ?
Also file _1EF96864D30AB5E656CF870A12958C25, rename to WinPE64.zip ?

It is nice to see that you are on top of the changes.  Any thing new about created a 32 bit
Acronis TrueImage with 2016 version?

Since ATI 2015, and now ATI 2016, there are no 32-bit version available in AcronisTrueImage_addons.
Maybe it exists in another Acronis product.
Only need snapapi.dll. If you run ATI2016 on 32 bit system, you will get snapman.sys, snapapi.dll, fltsrv.dll for 32 bit. Other way, unpack ATI setup file and get it.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on January 30, 2016, 10:28:49 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on February 02, 2016, 10:50:47 PM
Thank you to let me know for Wimlib 1.9  :thumbsup: it is on SE servers now  :thumbsup:
Wimlib is really great and more and more powerfull at each release :great:
I was very busy in January,  it should be a little better in February, but I would stay a bit busy.

 :smile:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on February 11, 2016, 06:29:11 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on February 26, 2016, 06:15:15 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on March 27, 2016, 11:13:12 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on March 28, 2016, 09:25:31 AM
Maybe you want to check it out. LSoft stuff sometimes contains nice utilities that you can add to your WinPESE projects as well.
There are already a set of plugins from LSoft available on servers...

Maybe you want to check it out, try to create a KillDisk Professional plugin with Utils\PC Innounp
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on April 18, 2016, 08:12:16 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: JFX on April 20, 2016, 07:39:41 AM
Thanks for the info, that are great news.

I think, I will finally update from ATI 2011  :smile:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on April 20, 2016, 08:26:04 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: SIW2 on April 20, 2016, 10:23:55 AM
Yes, I am around.  :grin:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on April 20, 2016, 06:21:26 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: JFX on April 22, 2016, 06:07:59 AM
You're welcome, glad to help, so you like "Acronis32" as well, do you?
Yes,  I want to have the same tools in both my PE's and sometimes I really still need a x86 PE.


And I can also confirm, for me Acronis currently has the best speed and compression level.
But no command line, no image mounting  :frusty:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on April 28, 2016, 04:42:43 AM
A good news to have ATI 2016 32bit, in addition to the 64-bit version.
I will also be able to use in x86 PE  :cool: and  thank you for the info :thumbsup:

In testing, I saw an anomaly, the backup operation failed, when there is not enough free space to receive the backup file.
It seems there is no test between the estimated backup size and the free space available.
It would be good to have, even if it is only an estimate.

Otherwise, I have not really seen gain, here, in the performance improvements written in 6559 changelog (http://www.acronis.com/en-us/support/updates/changes.html?p=37994)
It took almost the same time here, between ATI 2016 x64 build 6027 and ATI 2016 x64 or x86 build 6559
I tested in VMWare, with a backup of windows 10 x64, disk space used 24,5 Gb. 
Anyway, ATI speed and compression remains a reference  :thumbsup:

Based on Kyhi Acronis TrueImage 2016 v12 on Yomi server, I made a "new" plugin for "Acronis TrueImage 2016 Update 2".
with both 32/64 bits versions and an option to use 32 bits version on x64 build, probably not useful!
I'll probably share it in another topic, to not disturb this good one  :thumbsup:  :great:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 01, 2016, 07:41:03 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 01, 2016, 09:11:48 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 16, 2016, 10:22:25 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: KYHI on June 16, 2016, 02:34:07 PM
exactly how 2016 was worked out with a beta key...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: KYHI on June 16, 2016, 02:43:33 PM
link to beta signup page ???

https://www.acronis.com/en-us/my/beta/

Atari,
last two sets D3WVSJCQ-CGTYE2A9 look the same??
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 16, 2016, 05:56:40 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: KYHI on July 04, 2016, 03:52:03 PM
The last two sets of Beta Key........

For those interested in Acronis Beta Testing 2017 - comes with 2017 Key good enough for PESE

http://www.acronis.com/en-us/homecomputing/trueimage/beta/2017.html
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on July 04, 2016, 06:49:21 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on July 23, 2016, 06:37:13 PM
Here are the direct download link's for Acronis Backup
http://dl2.acronis.com/s/AcronisBackup_11.5_en-US.exe
http://dl2.acronis.com/s/AcronisBackup_11.7_en-US.exe
http://dl2.acronis.com/u/AcronisBackup12/Release/AcronisBackup_12_32-bit.exe
http://dl2.acronis.com/u/AcronisBackup12/Release/AcronisBackup_12_64-bit.exe

Does anyone know of the shorter links for Acronis Backup 12?    :confused:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 05, 2016, 07:31:57 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Prz42 on August 07, 2016, 05:03:45 AM
Terabyte Image for Windows 3.00!!!
http://www.terabyteunlimited.com/upgradehist-image-for-windows.htm
I noticed that they put a hard timer in the program.  It also affects the PE
program. The file that contains the timer is ifw.ini
Code: [Select]
[Options]
PrefixHM=1838D60E988C6B0481CCE0B666917FC7C58ED6FB
PHYLockUseReg=0x0
[PHYLock_Options]
UseVSS=0

[License]
ProductKey=
User=
The direct download link is for trial version is gui
http://www.terabyteunlimited.com/downloads/terabyte_drive_image_backup_and_restore_suite_en_gui_trial.exe
The direct download link is for trial version is cui
http://www.terabyteunlimited.com/downloads/terabyte_drive_image_backup_and_restore_suite_en_cui_trial.exe
Unable to find the direct download link for the full version setup file.      :scooter:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on August 11, 2016, 01:00:52 AM
Macrium Reflect v6.2.1495       9th August 2016

What's New 6.2.1495 - 9th August 2016

    Windows 10 Anniversary Update release
    This release contains changes to the Macrium Reflect process execution and Service to overcome scheduling problems with the Windows 10 Anniversary Update.
   
    Windows 10 systray backup notifications
    The number of Windows Tray Notifications shown when a scheduled backup starts has been reduced.
    Improved application exit performance
    Reflect could occasionally 'hang' for many seconds before shutting down. The exit and cleanup functionality has been improved.

Bug Fixes

    Windows PE Image mounting failure
    When UEFI booting Windows PE rescue media, mounted images could fail to open in PE Explorer. This has been resolved.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on August 11, 2016, 03:06:18 AM
Macrium Reflect  v6.2.1502  - 11th August 2016


Bug Fixes 6.2.1502

    Windows 10 UEFI DVD/CD UEFI boot problems
    Windows 10 DVD/CD rescue media was only able to boot legacy MBR after installing release v6.2.1495. This has been resolved.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on August 16, 2016, 03:25:17 PM
Terabyte
Image for Windows: Upgrade History

    Version 3.01 - August 16, 2016
    Corrected problem (identified as pure virtual function call) that could occur when an operation was started.
    Other potential changes, updates and enhancements.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 22, 2016, 06:40:25 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on August 22, 2016, 11:23:14 AM
Thanks for the news.
I confirm that the Encoded Beta serial registry works on PE

[attach=1]
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 23, 2016, 07:11:27 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: KYHI on August 23, 2016, 09:28:38 AM
Acronis 2016 already used the Beta Key.. So nothing new here...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 23, 2016, 10:01:40 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on August 23, 2016, 11:05:42 AM
Thanks for the table, not sure the builder is well suited for such conversion !

First character=Normal serial notation
Characters 3-5: Registry notation (replace dots with spaces):
Good to note that the double dots must be replaced by a single space  false double dots = double spaces
Code: [Select]
48XTNCN9-
 97109 13  1 27 22 27 108120
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on August 23, 2016, 03:47:15 PM
Thanks for the news.
I confirm that the Encoded Beta serial registry works on PE

(Attachment Link)
Can you test with change language code in registry?  :smile:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on August 23, 2016, 05:56:00 PM
Acronis True Image 2017 multi language was make some change language key. For Linux boot media, it was change:
language=13 (chinese) to language=zh_CN (region code). In windows, language code write in this key
[HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\Global]
"language"="" (REG_SZ value)
language code can see my pic.
For PE version, it don't work. May be need rescue media WinPE version (in other language) for check registry value.  :sad:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 23, 2016, 09:06:40 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on August 23, 2016, 10:15:19 PM
But in my example before, the double dots were for **two** spaces, as you can see in the table...
You are right, sorry for my wrong input  :embarrassed:


Can you test with change language code in registry?  :smile:
There is no change, same as ATI2016, for the language key on PE side
Code: [Select]
[HKEY_LOCAL_MACHINE\SOFTWARE\Acronis]
"language"=dword:0000000d  ;=13

[attach=1]
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: JFX on August 23, 2016, 11:08:30 PM
Not interested in creating a GUI, but here you have the conversion functions in PB.

Code: [Select]
Structure aAcronis
  s.s[256]
EndStructure

Global aAcronis2017.aAcronis

aAcronis2017\s['1'] = "100"
aAcronis2017\s['2'] = "103"
aAcronis2017\s['3'] = "102"
aAcronis2017\s['4'] = " 97"
aAcronis2017\s['5'] = " 96"
aAcronis2017\s['6'] = " 99"

aAcronis2017\s['7'] = " 98"
aAcronis2017\s['8'] = "109"
aAcronis2017\s['9'] = "108"
aAcronis2017\s['A'] = " 20"
aAcronis2017\s['B'] = " 23"
aAcronis2017\s['C'] = " 22"
aAcronis2017\s['D'] = " 17"

aAcronis2017\s['E'] = " 16"
aAcronis2017\s['F'] = " 19"
aAcronis2017\s['G'] = " 18"
aAcronis2017\s['H'] = " 29"
aAcronis2017\s['J'] = " 31"
aAcronis2017\s['K'] = " 30"
aAcronis2017\s['L'] = " 25"

aAcronis2017\s['M'] = " 24"
aAcronis2017\s['N'] = " 27"
aAcronis2017\s['O'] = " 26"
aAcronis2017\s['P'] = "  5"
aAcronis2017\s['Q'] = "  4"
aAcronis2017\s['R'] = "  7"
aAcronis2017\s['S'] = "  6"

aAcronis2017\s['T'] = "  1"
aAcronis2017\s['U'] = "  0"
aAcronis2017\s['V'] = "  3"
aAcronis2017\s['W'] = "  2"
aAcronis2017\s['X'] = " 13"
aAcronis2017\s['Y'] = " 12"
aAcronis2017\s['Z'] = " 15"

aAcronis2017\s['-'] = "120"

Procedure.s Acronis2017KeyToRegString(sKey.s)
 
  Protected sOut.s, *c.Character = @sKey
 
  While *c\c
    If *c\c >= 0 And *c\c =< 255
      sOut + aAcronis2017\s[*c\c]
    EndIf
    *c + SizeOf(Character)
  Wend
 
  ProcedureReturn sOut
 
EndProcedure



Procedure.s Acronis2017RegStringToKey(sRegString.s)
 
  Protected sOut.s, x, y, sChar.s
 
  For x = 0 To 70
   
    sChar = Mid(sRegString, (x * 3) + 1, 3)
   
    For y = 0 To 255
      If sChar = aAcronis2017\s[y]
        sOut + Chr(y)
        Break
      EndIf
    Next
  Next
 
  ProcedureReturn sOut
 
EndProcedure
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 24, 2016, 12:43:06 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on August 24, 2016, 01:42:29 AM
Can you test with change language code in registry?  :smile:
There is no change, same as ATI2016, for the language key on PE side
Code: [Select]
[HKEY_LOCAL_MACHINE\SOFTWARE\Acronis]
"language"=dword:0000000d  ;=13

(Attachment Link)
Can you test change language from English PE (not chinese PE)? I can't change ATIH from English to Chinese (in English PE).
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: ChrisR on August 24, 2016, 02:03:48 AM
Not interested in creating a GUI, but here you have the conversion functions in PB.
:thumbsup:
Interested for learning on my side, here is a small GUI with JFX conversion functions in both directions

[attach=1]
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on August 24, 2016, 02:47:14 AM
Re-test in Chinese PE, now ATIH 2017 can auto detect your language PE and start with your language. Need some help: What key&dll when ATIH 2017 use to change language?
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on August 24, 2016, 02:54:52 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on August 25, 2016, 11:41:09 PM
TeraByte IFW    Version 3.02 - August 26, 2016


    Wrapped all drivers and executable with dual signatures to support outdated Win7 x64.
    Updated PHYLock to version 14. Changed to reduce chance of PHYLock error 2 when disk caching used.
    Other potential changes, updates and enhancements.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Rui Paz on November 22, 2016, 04:08:47 AM
I found my notes from last year, where Anshad explained to me that Acronis can run almost as a portable program, as long as you copy the correct files (sys,dll) to %windir%\system and %windir%\system\drivers, and then manually create and start the services. I must admit I almost competely forgot about that possibility  :sad:

Hi Atari800xl,

Any chance of sharing the notes about running Acronis almost portable? or a plug-in  :embarrassed:

I have a problem with my WinPE with conflicting UpperFilters from two different programs AOMEI Backupper and Seagate DiskWizard maybe your method can help me solving the conflict.

TIA.
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on November 23, 2016, 01:01:32 AM
I have a problem with my WinPE with conflicting UpperFilters from two different programs AOMEI Backupper and Seagate DiskWizard maybe your method can help me solving the conflict.

Hi Rui Paz,

There is
Gena\Drivers\6 Other\"Add/Remove UpperFilters" plugin available.

To Test:
copy plugin to
\Projects\MyPlugins_Direct\DriversMy
or create link
(Inside "CodeBox")
Code: [Select]
[Process]
If,ExistFile,%api%,AddVariables,%api%,ApiVar,GLOBAL
//--
Call,CreateLink,"%BaseDir%\Projects\Gena\Drivers\6 Other\AddRemoveUpperFilters.script",%ProjectDir%\Drivers

You will see it is designed to help conflicting UpperFilters trouble.


Since not tested on SE, It is still at only Gena.

Let us know how things goes
  on another new topic http://TheOven.org/index.php?board=9.0
     without interrupting current one longer.  :wink:

See You
:turtle:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Rui Paz on November 23, 2016, 05:35:03 AM
Hi Lancelot,

Thanks for the suggestion but I don't need it anymore.

I did a mistake in one of my scripts and loaded the filter on the wrong category  :embarrassed: after realizing that both programs are working fine now.

Only the question about the portable Acronis remain...




Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: hason_sonha_itt on December 19, 2016, 06:40:34 PM
Acronis Portable:
- Use WinPE32.zip & WinPE64.zip from installer
- Unpack, copy all file to same folder (no sub folder)
- If you don't use F11 function, only keep this file: dll, exe, sys, Microsoft.VC80.CRT.manifest (for older version than 2016)
- Create file bat (acronis.cmd etc...) with this code:
+ For 32 bit (can use in 64 bit)
Code: [Select]
@echo Off
pushd %~dp0
REG QUERY HKLM\SYSTEM\ControlSet001\Services\snapman /ve
IF %ERRORLEVEL% NEQ 0 goto check_fltsrv
goto pe
:check_fltsrv
REG QUERY HKLM\SYSTEM\ControlSet001\Services\fltsrv /ve
IF %ERRORLEVEL% NEQ 0 GOTO win
goto pe
:WIN
if /i "%PROCESSOR_IDENTIFIER:~0,3%"=="X86" goto Win732
goto Win764
:Win764
copy "%~dp0snapman64.sys" %SystemRoot%\System32\drivers\snapman.sys /Y
copy "%~dp0fltsrv64.sys" %SystemRoot%\System32\drivers\fltsrv.sys /Y
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "ErrorControl" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "DisplayName" /T REG_SZ /D "Acronis Storage Filter Management"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Group" /T REG_SZ /D "Filter"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\fltsrv.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Start" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Type" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Tag" /T REG_DWORD /D "2"
sc.exe create fltsrv type= kernel start= boot binpath= "System32\DRIVERS\fltsrv.sys"
sc.exe start fltsrv
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "DisplayName" /T REG_SZ /D "Acronis Snapshot Manager"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "ErrorControl" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\snapman.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "Start" /T REG_DWORD  /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "Type" /T REG_DWORD /D "1"
sc.exe create snapman type= kernel start= boot binpath= "System32\DRIVERS\snapman.sys"
sc.exe start snapman
REG.exe Add HKLM\Software\Acronis\TrueImage /f /v "standard" /t REG_SZ /d "  7 24 17 16  6 15  7102120 23 17 24 27 16 17 15 17120 16 97103 27 17  3 15 16120 22 97 98 17 12 27109 17120 17 97109103 17 22 31 23120  7103 18  0  7 31 19108120108  2 12 19 25102109  7120  6 24 96109  4 96 15 98"
REG.exe Add HKLM\Software\Wow6432Node\Acronis\TrueImage /f /v "standard" /t REG_SZ /d "  7 24 17 16  6 15  7102120 23 17 24 27 16 17 15 17120 16 97103 27 17  3 15 16120 22 97 98 17 12 27109 17120 17 97109103 17 22 31 23120  7103 18  0  7 31 19108120108  2 12 19 25102109  7120  6 24 96109  4 96 15 98"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "icu38.dll" /T REG_SZ /D "%~dp0icu38.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "rpc_client.dll" /T REG_SZ /D "%~dp0rpc_client.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "resource.dll" /T REG_SZ /D "%~dp0resource.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "thread_pool.dll" /T REG_SZ /D "%~dp0thread_pool.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "libcrypto10.dll" /T REG_SZ /D "%~dp0libcrypto10.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "libssl10.dll" /T REG_SZ /D "%~dp0libssl10.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "auto_reactivate.bin" /T REG_SZ /D "%~dp0auto_reactivate.bin"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "auto_reactivate64.bin" /T REG_SZ /D "%~dp0auto_reactivate64.bin"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "kb_link.dll" /T REG_SZ /D "%~dp0kb_link.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "ulxmlrpcpp.dll" /T REG_SZ /D "%~dp0ulxmlrpcpp.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "expat.dll" /T REG_SZ /D "%~dp0expat.dll"
REG.EXE ADD HKLM\SOFTWARE\Wow6432Node\Acronis\TrueImageHome\Settings /f /v "WorkingDir" /T REG_SZ /D "%~dp0
REG.exe Add HKLM\Software\WOW6432node\Acronis /f /v "language" /T REG_DWORD /D "1"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control" /v SystemStartOptions | find /i "MININT" >nul
IF errorlevel 1 goto end
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "PartMgr\0fltsrv"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /v UpperFilters | find /i "ambakdrv" >nul
if %ERRORLEVEL%==1 (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv"
) else (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv\0ambakdrv"
)
goto end
:Win732
copy "%~dp0snapman.sys" %SystemRoot%\system32\drivers\snapman.sys /Y
copy "%~dp0fltsrv.sys" %SystemRoot%\system32\drivers\fltsrv.sys /Y
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "ErrorControl" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "DisplayName" /T REG_SZ /D "Acronis Storage Filter Management"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Group" /T REG_SZ /D "Filter"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\fltsrv.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Start" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Type" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Tag" /T REG_DWORD /D "2"
sc.exe create fltsrv type= kernel start= boot binpath= "System32\DRIVERS\fltsrv.sys"
sc.exe start fltsrv
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "DisplayName" /T REG_SZ /D "Acronis Snapshot Manager"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "ErrorControl" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\snapman.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "Start" /T REG_DWORD  /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "Type" /T REG_DWORD /D "1"
sc.exe create snapman type= kernel start= boot binpath= "System32\DRIVERS\snapman.sys"
sc.exe start snapman
REG.exe Add HKLM\Software\Acronis\TrueImage /f /v "standard" /t REG_SZ /d "  7 24 17 16  6 15  7102120 23 17 24 27 16 17 15 17120 16 97103 27 17  3 15 16120 22 97 98 17 12 27109 17120 17 97109103 17 22 31 23120  7103 18  0  7 31 19108120108  2 12 19 25102109  7120  6 24 96109  4 96 15 98"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "icu38.dll" /T REG_SZ /D "%~dp0icu38.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "rpc_client.dll" /T REG_SZ /D "%~dp0rpc_client.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "resource.dll" /T REG_SZ /D "%~dp0resource.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "thread_pool.dll" /T REG_SZ /D "%~dp0thread_pool.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libcrypto10.dll" /T REG_SZ /D "%~dp0libcrypto10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libssl10.dll" /T REG_SZ /D "%~dp0libssl10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate.bin" /T REG_SZ /D "%~dp0auto_reactivate.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate64.bin" /T REG_SZ /D "%~dp0auto_reactivate64.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "kb_link.dll" /T REG_SZ /D "%~dp0kb_link.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "ulxmlrpcpp.dll" /T REG_SZ /D "%~dp0ulxmlrpcpp.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "expat.dll" /T REG_SZ /D "%~dp0expat.dll"
REG.EXE ADD HKLM\SOFTWARE\Acronis\TrueImageHome\Settings /f /v "WorkingDir" /T REG_SZ /D "%~dp0
REG.exe Add HKLM\Software\Acronis /f /v "language" /T REG_DWORD /D "1"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control" /v SystemStartOptions | find /i "MININT" >nul
IF errorlevel 1 goto end
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "PartMgr\0fltsrv"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /v UpperFilters | find /i "ambakdrv" >nul
if %ERRORLEVEL%==1 (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv"
) else (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv\0ambakdrv"
)
goto end
:pe
if /i "%PROCESSOR_IDENTIFIER:~0,3%"=="X86" goto pe32
goto pe64
:pe64
copy "%~dp0snapman64.sys" %SystemRoot%\System32\drivers\snapman64.sys /Y
copy "%~dp0fltsrv64.sys" %SystemRoot%\System32\drivers\fltsrv64.sys /Y
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "ErrorControl" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "DisplayName" /T REG_SZ /D "Acronis Storage Filter Management"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Group" /T REG_SZ /D "Filter"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\fltsrv64.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Start" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Type" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Tag" /T REG_DWORD /D "2"
sc.exe create fltsrv64 type= kernel start= boot binpath= "System32\DRIVERS\fltsrv64.sys"
sc.exe start fltsrv64
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "DisplayName" /T REG_SZ /D "Acronis Snapshot Manager"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "ErrorControl" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\snapman64.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "Start" /T REG_DWORD  /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "Type" /T REG_DWORD /D "1"
sc.exe create snapman64 type= kernel start= boot binpath= "System32\DRIVERS\snapman64.sys"
sc.exe start snapman64
REG.exe Add HKLM\Software\Acronis\TrueImage /f /v "standard" /t REG_SZ /d "  7 24 17 16  6 15  7102120 23 17 24 27 16 17 15 17120 16 97103 27 17  3 15 16120 22 97 98 17 12 27109 17120 17 97109103 17 22 31 23120  7103 18  0  7 31 19108120108  2 12 19 25102109  7120  6 24 96109  4 96 15 98"
REG.exe Add HKLM\Software\Wow6432Node\Acronis\TrueImage /f /v "standard" /t REG_SZ /d "  7 24 17 16  6 15  7102120 23 17 24 27 16 17 15 17120 16 97103 27 17  3 15 16120 22 97 98 17 12 27109 17120 17 97109103 17 22 31 23120  7103 18  0  7 31 19108120108  2 12 19 25102109  7120  6 24 96109  4 96 15 98"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "icu38.dll" /T REG_SZ /D "%~dp0icu38.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "rpc_client.dll" /T REG_SZ /D "%~dp0rpc_client.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "resource.dll" /T REG_SZ /D "%~dp0resource.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "thread_pool.dll" /T REG_SZ /D "%~dp0thread_pool.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "libcrypto10.dll" /T REG_SZ /D "%~dp0libcrypto10.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "libssl10.dll" /T REG_SZ /D "%~dp0libssl10.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "auto_reactivate.bin" /T REG_SZ /D "%~dp0auto_reactivate.bin"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "auto_reactivate64.bin" /T REG_SZ /D "%~dp0auto_reactivate64.bin"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "kb_link.dll" /T REG_SZ /D "%~dp0kb_link.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "ulxmlrpcpp.dll" /T REG_SZ /D "%~dp0ulxmlrpcpp.dll"
REG.exe ADD HKLM\SOFTWARE\Wow6432Node\Acronis\CommonComponents /f /v "expat.dll" /T REG_SZ /D "%~dp0expat.dll"
REG.EXE ADD HKLM\SOFTWARE\Wow6432Node\Acronis\TrueImageHome\Settings /f /v "ServiceDir" /T REG_SZ /D "%~dp0
REG.exe Add HKLM\Software\WOW6432node\Acronis /f /v "language" /T REG_DWORD /D "1"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control" /v SystemStartOptions | find /i "MININT" >nul
IF errorlevel 1 goto end
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "PartMgr\0fltsrv"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /v UpperFilters | find /i "ambakdrv" >nul
if %ERRORLEVEL%==1 (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv"
) else (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv\0ambakdrv"
)
goto end
:pe32
copy "%~dp0snapman.sys" %SystemRoot%\system32\drivers\snapman32.sys /Y
copy "%~dp0fltsrv.sys" %SystemRoot%\system32\drivers\fltsrv32.sys /Y
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "ErrorControl" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "DisplayName" /T REG_SZ /D "Acronis Storage Filter Management"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "Group" /T REG_SZ /D "Filter"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\fltsrv32.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "Start" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "Type" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv32 /f /v "Tag" /T REG_DWORD /D "2"
sc.exe create fltsrv32 type= kernel start= boot binpath= "System32\DRIVERS\fltsrv32.sys"
sc.exe start fltsrv32
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman32 /f /v "DisplayName" /T REG_SZ /D "Acronis Snapshot Manager"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman32 /f /v "ErrorControl" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman32 /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\snapman32.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman32 /f /v "Start" /T REG_DWORD  /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman32 /f /v "Type" /T REG_DWORD /D "1"
sc.exe create snapman32 type= kernel start= boot binpath= "System32\DRIVERS\snapman32.sys"
sc.exe start snapman32
REG.exe Add HKLM\Software\Acronis\TrueImage /f /v "standard" /t REG_SZ /d "  7 24 17 16  6 15  7102120 23 17 24 27 16 17 15 17120 16 97103 27 17  3 15 16120 22 97 98 17 12 27109 17120 17 97109103 17 22 31 23120  7103 18  0  7 31 19108120108  2 12 19 25102109  7120  6 24 96109  4 96 15 98"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "icu38.dll" /T REG_SZ /D "%~dp0icu38.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "rpc_client.dll" /T REG_SZ /D "%~dp0rpc_client.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "resource.dll" /T REG_SZ /D "%~dp0resource.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "thread_pool.dll" /T REG_SZ /D "%~dp0thread_pool.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libcrypto10.dll" /T REG_SZ /D "%~dp0libcrypto10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libssl10.dll" /T REG_SZ /D "%~dp0libssl10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate.bin" /T REG_SZ /D "%~dp0auto_reactivate.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate64.bin" /T REG_SZ /D "%~dp0auto_reactivate64.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "kb_link.dll" /T REG_SZ /D "%~dp0kb_link.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "ulxmlrpcpp.dll" /T REG_SZ /D "%~dp0ulxmlrpcpp.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "expat.dll" /T REG_SZ /D "%~dp0expat.dll"
REG.EXE ADD HKLM\SOFTWARE\Acronis\TrueImageHome\Settings /f /v "WorkingDir" /T REG_SZ /D "%~dp0
REG.exe Add HKLM\Software\Acronis /f /v "language" /T REG_DWORD /D "1"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control" /v SystemStartOptions | find /i "MININT" >nul
IF errorlevel 1 goto end
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "PartMgr\0fltsrv"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /v UpperFilters | find /i "ambakdrv" >nul
if %ERRORLEVEL%==1 (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv"
) else (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv\0ambakdrv"
)
goto end
:end
start "%~dp0" "TrueImage.exe"
exit
+ For 64 bit:
Code: [Select]
@echo off
pushd %~dp0
REG QUERY HKLM\SYSTEM\ControlSet001\Services\snapman /ve
IF %ERRORLEVEL% NEQ 0 goto check_fltsrv
goto pe
:check_fltsrv
REG QUERY HKLM\SYSTEM\ControlSet001\Services\fltsrv /ve
IF %ERRORLEVEL% NEQ 0 GOTO win
goto pe
:WIN
copy "%~dp0snapman.sys" %SystemRoot%\System32\drivers\snapman.sys /Y
copy "%~dp0fltsrv.sys" %SystemRoot%\System32\drivers\fltsrv.sys /Y
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "ErrorControl" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "DisplayName" /T REG_SZ /D "Acronis Storage Filter Management"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Group" /T REG_SZ /D "Filter"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\fltsrv.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Start" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Type" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv /f /v "Tag" /T REG_DWORD /D "2"
sc.exe create fltsrv type= kernel start= boot binpath= "System32\DRIVERS\fltsrv.sys"
sc.exe start fltsrv
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "DisplayName" /T REG_SZ /D "Acronis Snapshots Manager"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "ErrorControl" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\snapman.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "Start" /T REG_DWORD  /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman /f /v "Type" /T REG_DWORD /D "1"
sc.exe create snapman type= kernel start= boot binpath= "System32\DRIVERS\snapman.sys"
sc.exe start snapman
REG.exe Add HKLM\Software\Acronis\TrueImage /f /v "standard" /t REG_SZ /d " 99 16 13  7  7 16 17 12120  1 17 29 98  4  4108 18120 24102103 97 16  5 22 30120 12  4 15 99 98  2  2 22120  3 20 20 31 22 98109 98120 29 12103 20  3103102102120 20 31  6 97 24  7 15  6120 23 20103 98 24  5 27109"
REG.exe Add HKLM\Software\Wow6432Node\Acronis\TrueImage /f /v "standard" /t REG_SZ /d " 99 16 13  7  7 16 17 12120  1 17 29 98  4  4108 18120 24102103 97 16  5 22 30120 12  4 15 99 98  2  2 22120  3 20 20 31 22 98109 98120 29 12103 20  3103102102120 20 31  6 97 24  7 15  6120 23 20103 98 24  5 27109"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "icu38.dll" /T REG_SZ /D "%~dp0icu38.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "rpc_client.dll" /T REG_SZ /D "%~dp0rpc_client.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "resource.dll" /T REG_SZ /D "%~dp0resource.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "thread_pool.dll" /T REG_SZ /D "%~dp0thread_pool.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libcrypto10.dll" /T REG_SZ /D "%~dp0libcrypto10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libssl10.dll" /T REG_SZ /D "%~dp0libssl10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate.bin" /T REG_SZ /D "%~dp0auto_reactivate.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate64.bin" /T REG_SZ /D "%~dp0auto_reactivate64.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "kb_link.dll" /T REG_SZ /D "%~dp0kb_link.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "ulxmlrpcpp.dll" /T REG_SZ /D "%~dp0ulxmlrpcpp.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "expat.dll" /T REG_SZ /D "%~dp0expat.dll"
REG.EXE ADD HKLM\SOFTWARE\Acronis\TrueImageHome\Settings /f /v "WorkingDir" /T REG_SZ /D "%~dp0
REG.exe Add HKLM\Software\WOW6432node\Acronis /f /v "language" /T REG_DWORD /D "3"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control" /v SystemStartOptions | find /i "MININT" >nul
IF errorlevel 1 goto end
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "PartMgr\0fltsrv"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /v UpperFilters | find /i "ambakdrv" >nul
if %ERRORLEVEL%==1 (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv"
) else (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv\0ambakdrv"
)
goto end
:pe
copy "%~dp0snapman.sys" %SystemRoot%\System32\drivers\snapman64.sys /Y
copy "%~dp0fltsrv.sys" %SystemRoot%\System32\drivers\fltsrv64.sys /Y
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "ErrorControl" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "DisplayName" /T REG_SZ /D "Acronis Storage Filter Management"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Group" /T REG_SZ /D "Filter"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\fltsrv64.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Start" /T REG_DWORD /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Type" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\fltsrv64 /f /v "Tag" /T REG_DWORD /D "2"
sc.exe create fltsrv64 type= kernel start= boot binpath= "System32\DRIVERS\fltsrv64.sys"
sc.exe start fltsrv64
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "DisplayName" /T REG_SZ /D "Acronis Snapshots Manager"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "ErrorControl" /T REG_DWORD /D "1"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "ImagePath" /T REG_SZ /D "System32\DRIVERS\snapman64.sys"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "Start" /T REG_DWORD  /D "0"
REG.exe ADD HKLM\SYSTEM\ControlSet001\Services\snapman64 /f /v "Type" /T REG_DWORD /D "1"
sc.exe create snapman64 type= kernel start= boot binpath= "System32\DRIVERS\snapman64.sys"
sc.exe start snapman64
REG.exe Add HKLM\Software\Acronis\TrueImage /f /v "standard" /t REG_SZ /d " 99 16 13  7  7 16 17 12120  1 17 29 98  4  4108 18120 24102103 97 16  5 22 30120 12  4 15 99 98  2  2 22120  3 20 20 31 22 98109 98120 29 12103 20  3103102102120 20 31  6 97 24  7 15  6120 23 20103 98 24  5 27109"
REG.exe Add HKLM\Software\Wow6432Node\Acronis\TrueImage /f /v "standard" /t REG_SZ /d " 99 16 13  7  7 16 17 12120  1 17 29 98  4  4108 18120 24102103 97 16  5 22 30120 12  4 15 99 98  2  2 22120  3 20 20 31 22 98109 98120 29 12103 20  3103102102120 20 31  6 97 24  7 15  6120 23 20103 98 24  5 27109"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "icu38.dll" /T REG_SZ /D "%~dp0icu38.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "rpc_client.dll" /T REG_SZ /D "%~dp0rpc_client.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "resource.dll" /T REG_SZ /D "%~dp0resource.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "thread_pool.dll" /T REG_SZ /D "%~dp0thread_pool.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libcrypto10.dll" /T REG_SZ /D "%~dp0libcrypto10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "libssl10.dll" /T REG_SZ /D "%~dp0libssl10.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate.bin" /T REG_SZ /D "%~dp0auto_reactivate.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "auto_reactivate64.bin" /T REG_SZ /D "%~dp0auto_reactivate64.bin"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "kb_link.dll" /T REG_SZ /D "%~dp0kb_link.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "ulxmlrpcpp.dll" /T REG_SZ /D "%~dp0ulxmlrpcpp.dll"
REG.exe ADD HKLM\SOFTWARE\Acronis\CommonComponents /f /v "expat.dll" /T REG_SZ /D "%~dp0expat.dll"
REG.EXE ADD HKLM\SOFTWARE\Acronis\TrueImageHome\Settings /f /v "WorkingDir" /T REG_SZ /D "%~dp0
REG.exe Add HKLM\Software\WOW6432node\Acronis /f /v "language" /T REG_DWORD /D "3"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control" /v SystemStartOptions | find /i "MININT" >nul
IF errorlevel 1 goto end
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "PartMgr\0fltsrv"
REG QUERY "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /v UpperFilters | find /i "ambakdrv" >nul
if %ERRORLEVEL%==1 (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv"
) else (
reg add "HKLM\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}" /f /v "UpperFilters" /t REG_MULTI_SZ /d "fltsrv\0ambakdrv"
)
goto end
:end
start "%~dp0" "TrueImage.exe"
exit
- Start acrnonis.cmd and use True Image in PE or Windows
- Note: Key only for beta version, you needs key (find from registry)
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Rui Paz on December 26, 2016, 10:44:56 AM
Thanks hason_sonha_itt for sharing the instructions.  :thumbsup:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 29, 2017, 05:15:13 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on June 30, 2017, 09:23:06 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on September 28, 2017, 09:18:31 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on September 28, 2017, 09:47:11 AM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on September 28, 2017, 11:12:40 AM
x64 free:
https://updates.macrium.com/reflect/v7/getmsi.asp?edition=0&type=99&arch=0

Hi Atari800Xl
I believe it should be arch=1  for x64

oddly if you use the ReflectDLHF.exe from their site it downloads 7.1.2602 but your links get 7.1.2607  :thumbsup:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Atari800xl on September 28, 2017, 04:19:08 PM
...
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on October 03, 2017, 08:27:04 AM
Hi Atari800xl
sorry for the delay in replying, been busy getting my phdm15, and other imaging plugins working
Quote
Please test v7 and share your findings...
only done minimal backup tests etc - seems fine, i'm sure feedback will let me know!!
here's my macrium v7.1.2619 free edtn plugin
xttps://my.pcloud.com/publink/show?code=XZ8Dsk7ZJDKaMb6y9qpd2iUOV9XMCJxsDQrV

 :thumbsup: :thumbsup:
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: APT on November 10, 2017, 10:26:28 AM
moved post to plugins section

http://theoven.org/index.php?topic=2281.msg24604;topicseen#msg24604
Title: Re: Disk imagers in PE/SE: Basic build info - Comparison - News
Post by: Lancelot on November 10, 2017, 10:54:49 AM
Hi APT,

Atari800xl seems to delete most of posts including current topic one.

It will be good to have your Macrium Reflect plugins at Plugins section so more noticeable by new users.
http://theoven.org/index.php?board=9.0
 :thumbsup:

:turtle: