The Oven

Project World => Win7PE SE HomePage => Topic started by: Grinch843 on January 08, 2018, 10:26:33 AM

Title: Build stops in network.script with error
Post by: Grinch843 on January 08, 2018, 10:26:33 AM
Just downloaded Win7PESE and tried to build a basic Win7pe, but the build process stops with the network.script with the following error.

RegWrite - Type: [0x4] Section [HKLM\Tmp_System\ControlSet001\Enum\Root\LEGACY_TCPIPREG] Key [NextInstance]: 1

The only changes I made to the build was to remove some of the apps and change the boot manager to standard.

I've tried to build on a Win10 Pro x64 system and a Win7 Pro x32 system, same error on both systems.

I've been using the Win10PESE to make Win10 builds with no problems.

Any help would be greatly appreciated...

Thanks,
Title: Re: Build stops in network.script with error
Post by: Lancelot on January 08, 2018, 01:14:01 PM
AT FAQ topic:
http://theoven.org/index.php?topic=834.0

Follow steps under
Q: My Build Fails (or Halt or BSOD or any other trouble) - What to do  ?
Title: Re: Build stops in network.script with error
Post by: Grinch843 on January 08, 2018, 04:48:10 PM
Ok, finally got it to work.  I had to go find a really OLD windows 7 ISO which fixed the build error but then I started getting missing files when booting it.   On a wim i decided to run my Win10PESE and download the Win7 project in there and that one works just fine.  Not sure why the Win7PESE does not work.

Thanks,