Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - freesoft00

Pages: [1]
1
Research and questions / Re: WinNTSetup
« on: November 22, 2017, 10:41:17 AM »
thank you

2
Research and questions / Re: WinNTSetup
« on: November 22, 2017, 02:55:57 AM »
Feedback:

3.8.7 installing ISO is not a problem.

3.8.8 start, select ISO, match WIM file, install will report error prompt.

3
Research and questions / Re: WinNTSetup
« on: November 19, 2017, 12:53:30 AM »
In WIM format XP Click to start installation will prompt error, Windows source is invalid, need to close prompt, click to start install again to install, and after the desktop will automatically add Microsoft Pinyin, Zheng Code, full spell, intelligent ABC Four Input method


4
Research and questions / Re: WinNTSetup
« on: October 28, 2017, 07:10:34 AM »
Preliminary test. There is no problem in the 2003 environment.

5
Research and questions / Re: WinNTSetup
« on: October 27, 2017, 01:12:16 AM »
Thanks a lot!
Excuse me, is this a formal version or a beta version?
I have forwarded. If there is any problem feedback.

6
Research and questions / Re: WinNTSetup
« on: October 23, 2017, 09:08:48 PM »
Fixed version what can be published?
Network access OneDrive in China is difficult

7
Research and questions / Re: WinNTSetup
« on: October 23, 2017, 07:19:27 AM »
Wimgapi V6.2.9200.16384
Winntsetup 3.8.8 in winpe2003 Environment, install WIM and ESD error.
Winntsetup 3.8.7 in winpe2003 Environment, install WIM and ESD normal.
In Win8pe, Win10pe Winntsetup 3.8.8 is normal.

Winntsetup 3.8.8 in winpe2003 Environment, change to use wimlib also normal.
But sometimes there are mistakes:
wimlib_extract_image 0x2: the WIM contains invalid compressed data.

8
Research and questions / Re: WinNTSetup
« on: October 20, 2017, 08:55:09 AM »
Does the Offreg.dll and WOFADK.SYS replace to the latest version to see if the winntsetup is working correctly?

9
Research and questions / Re: WinNTSetup
« on: October 13, 2017, 10:18:29 AM »
If I make something to do this, is "-wimindex:1" where it gets edition? index:2home, index:3pro etc?

Can command line WinNTSetup use iso or does it have to be mounted first?

Yes, can use an ISO with the command line and wimindex is usually a 1-based index.
But you can also pass it's name:

Code: [Select]
WinNTSetup_x64.exe NT6 -source:J:\16299.15.170928-1534.RS3_RELEASE_CLIENTCONSUMER_OEMRET_X64FRE_DE-DE.ISO -wimindex:"Windows 10 Pro"

WinNtsetup3.8.8
Installs the Win7 64-bit system in the WIN10 X64 PE environment. Winntsetup prompts for memory errors during installation and exits.
The win7 system ISO file is WIN10, and the system WIM file is converted to ESD format.
Same environment, same system file, WinNtsetup3.8.7 normal.


10
Research and questions / Re: WinNTSetup
« on: September 29, 2017, 01:06:02 AM »

Ok.
Automatic loading of hidden boot partitions is ok. However, you need to fix bugs that automatically load visible partitions of U disk

11
Research and questions / Re: WinNTSetup
« on: September 28, 2017, 03:47:48 AM »
Is the final content of the help document duplicated?
In addition, help content feel a bit messy layout, not neat.

12
Research and questions / Re: WinNTSetup
« on: September 28, 2017, 01:53:19 AM »
The BCDboot command is identified, right?

13
Research and questions / Re: WinNTSetup
« on: September 28, 2017, 01:50:46 AM »
The result command of the Setup Wizard is not clear, do you know which of the following commands?

14
Research and questions / Re: WinNTSetup
« on: September 28, 2017, 01:42:34 AM »
Running the winntsetup388b3 matching INI file is no longer automatically loading hidden partitions.
But there is one problem. The boot part on the Winntsetup interface displays red. UEFI Environment, the EFI part shows red.
This does not install the system properly. Because the Winntsetup Installation Wizard must specify a boot partition. However, you cannot specify the correct boot partition without loading the hidden boot partition. This installs the error.
You can actually use DISM or ImageX to install without specifying a boot partition. For example:
imagex /apply w:\sources\install.wim 1 c:\
bcdboot c:\windows /l zh-cn
After the partition is created, the BCDboot command automatically adds the required files to the hidden boot partition.

15
Research and questions / Re: WinNTSetup
« on: September 28, 2017, 12:38:28 AM »
Tested the INI parameter.

Running Winntsetup will still automatically load the hidden letter to test the ambient BIOS. There are hidden partitions, which are 300MB boot partitions.

It is not known whether Winntsetup automatically unloads the loaded hidden partition when exiting. I use Diskgenius to find that the z disk is still there, but running the mountvol command did not find the z disk?

16
Research and questions / Re: WinNTSetup
« on: September 27, 2017, 10:31:11 PM »
All right. That's it.
The problem is only circumvented. Doesn't actually solve the bug that's automatically loaded.
Thank you!

17
Research and questions / Re: WinNTSetup
« on: September 24, 2017, 08:12:46 AM »
GPT partitions are created by Diskgenius
Partitions created by Diskgenius and DiskPart are not significantly different
The ESP partition created by Diskgenius is the FAT format, and the ESP partition created by DiskPart is FAT32 format
Also, the user simply created the FAT partition, without the ESP partition, which can start the system as normal in the UEFI environment. The user's disk partitioning situation is inherently complex.
Winntsetup should be improved in fault tolerance. Determine if the partition is loaded and not be loaded again after loading.

Add a judgment:
UEFI environment, do not load any partitions without GPT disks. There are GPT disks that are loaded by hidden partitions and do not load repeatedly.
BIOS environment, do not automatically load any partitions.

Now there is a situation. Starting from the U disk, Winntsetup will repeatedly load the visible partition of the U disk. Occurs in both the UEFI environment and the BIOS environment.
U disk Boot disk use the program here:
http://bbs.wuyou.net/forum.php?mod=viewthread&tid=349965&extra=page%3D1
is created with a 3 partition boot disk with a hidden partition.
Feedback screenshot here:
http://bbs.wuyou.net/forum.php?mod=redirect&goto=findpost&ptid=397942&pid=3440635&fromuid=1345

18
Research and questions / Re: WinNTSetup
« on: September 23, 2017, 01:57:22 AM »
1.
Winntsetup mount Partition should have a judgment mechanism.
The current version of Winntsetup will automatically mount partitions in the BIOS environment. This is wrong.
As shown in the following figure, the BIOS environment loads a hidden partition of a USB stick

2.
The ESP partition is repeatedly loaded and the ESP partition has been loaded as a Z disk after the WinPE boot, but after running Winntsetup the ESP partition is repeatedly loaded with a W disk.

19
Research and questions / Re: WinNTSetup
« on: September 23, 2017, 01:52:33 AM »
GIF image upload Forum into a static diagram.

Dynamic picture here:
http://bbs.wuyou.net/forum.php?mod=redirect&goto=findpost&ptid=397942&pid=3440328&fromuid=1345

20
Research and questions / Re: WinNTSetup
« on: September 23, 2017, 01:48:57 AM »
1.
Winntsetup mount Partition should have a judgment mechanism.
The current version of Winntsetup will automatically mount partitions in the BIOS environment. This is wrong.
As shown in the following figure, the BIOS environment loads a hidden partition of a USB stick

2.
The ESP partition is repeatedly loaded and the ESP partition has been loaded as a Z-disk after the WinPE boot, but after running Winntsetup the ESP partition is repeatedly loaded with a W disk.

Pages: [1]
Powered by EzPortal