Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - ChrisR

Pages: [1] 2 3 ... 102
1
PEBakery / Re: PEBakery Test Build
« on: December 02, 2017, 04:33:11 AM »
Thanks ied206,
Be free, really free, with Win10PESE, the parenthesis is now closed for me.
And so, I leave the hand to you, Lancelot, JFX or others in the directions that you think are the best.
I wish you all the best  :thumbsup:




2
Win10PE SE HomePage / Re: Win10PE SE Release
« on: December 02, 2017, 04:20:51 AM »
Updated Win10PE_SE_2017-12-02

Compatibility with the promising PEBakery. Thanks ied206 for this great work to continue :thumbsup:
And thanks Lancelot, for all the corrections and updates for PEBackery support :thumbsup:
And with other updates also...

Thank you all for the support, see you soon  :great:


Important: Always Check Win10PESE Release topic post 1 to get latest updates and informations.

3
PEBakery / Re: PEBakery Test Build
« on: December 02, 2017, 03:08:36 AM »
Hi ied206,
I just tested a standard build with PEBackery and all Lancelot's updates and everything worked fine  :thumbsup:
It's a really big job. Well done  :great:
Congratulations also for the open GPL3 license. The way to go. I hope you will have future contributions.
In other times, I would have tried to participate.
I hope it can become really better than just a fixed WB Clone. It deserves. Good luck
Thanks  :great:

4
Other World / All good things must come to an end
« on: December 01, 2017, 11:19:44 AM »
I was present and reliable during several years, since September 2010 by trying to do my best.
I took a lot of pleasure to learn, to develop and to share with the Theoven team and many, many others :wub:
But, I have to look at the facts in front, it is no longer the case now.
Something in my madness is broken now and I cannot continue to give free of charge eternally.
But it is not a good escuse.
I simply have to work to make my living and to preserve my family life.
I just finished a mission and if everything goes well I should sign a new contract, soon.

For the good of the projects, the forum, it is preferable that I leave the hand now.
And to come back from time to time, maybe just to say hello.
I will not forget you, take care and be free. See you soon.
 :cheers:

5
Research and questions / Re: Rufus update available
« on: November 11, 2017, 09:32:18 AM »
Thanks APT, Rufus plugin is updated on servers.

6
Win7PE SE HomePage / Re: boot.wim size and 0xc0000017 error
« on: November 11, 2017, 09:21:51 AM »
I see that you renamed the Programs folder to Programs_SE_x64.
Have you also rename the shortcut's target in Win7pe.cfg ?
ex:
Code: [Select]
[shortcut]
Network|Mozilla Firefox|Y:\Programs\Mozilla Firefox\Firefox.exe||
Desktop|Mozilla Firefox|Y:\Programs\Mozilla Firefox\Firefox.exe||

Code: [Select]
[shortcut]
Network|Mozilla Firefox|Y:\Programs_SE_x64\Mozilla Firefox\Firefox.exe||
Desktop|Mozilla Firefox|Y:\Programs_SE_x64\Mozilla Firefox\Firefox.exe||


7
Research and questions / Re: PENetwork.ini VS Autorun.cmd
« on: November 11, 2017, 09:02:06 AM »
PENetwork and autorun.cmd are launched at the same time via RunOnce registry key.
For PENetwork, the profiles (PENetwork.ini) are then loaded once the network is started and available with also the possibility to launch CMDs or a batch, after the Network support is running or after obtaining the IP .
In autorun, there is nothing writen to know if the network is started or not, to use for example Net Use Z: \\ xxx

An Additional plugin in Final_Y folder to add custom things to the end of Autorun.cmd is a good idea, if you want to do it.

8
Win10PE SE HomePage / Re: Auto Drive Mapping Fails
« on: November 11, 2017, 08:43:20 AM »
In your PEnetwork.ini, I noticed that you have a different address between the NetPath and the NetDrv.Path
To create network drives in addition to PENetwork.ini you could probably use PeNetwork_After.cmd in "CMDs after startup"
with inside Net Use B: \\192.168.5.33\backup /user:<username> <password> and others.

9
Win7PE SE HomePage / Re: boot.wim size and 0xc0000017 error
« on: November 11, 2017, 08:21:56 AM »
but because I am using grub4dos as the boot loader, I have to use the "run from RAM" option for my plugins. This also increases the size of the boot.wim file.
As far as I know, tThere is no link between grub4dos and "run from RAM".
You can use "run from CD(USB)" with grub4dos or other boot loader without restriction and thus reduce the size of boot.wim

10
Plugins / Re: [request] vc++ 2017 runtimes
« on: November 07, 2017, 05:02:42 PM »
I have updated "MS Visual C ++ Runtime" plugin with VC++ 2017 included as a replacement for VC++ 2015
2017 (v14.xx) is just an update of version 2015

FYI, once installed the cab files are here:
Code: [Select]
C:\ProgramData\Package Cache\{029DA848-1A80-34D3-BFC1-A6447BFC8E7F}v14.11.25325\packages\vcRuntimeMinimum_x86
C:\ProgramData\Package Cache\{568CD07E-0824-3EEB-AEC1-8FD51F3C85CF}v14.11.25325\packages\vcRuntimeAdditional_x86

C:\ProgramData\Package Cache\{B0037450-526D-3448-A370-CACBD87769A0}v14.11.25325\packages\vcRuntimeMinimum_amd64
C:\ProgramData\Package Cache\{B13B3E11-1555-353F-A63A-8933EE104FBD}v14.11.25325\packages\vcRuntimeAdditional_amd64

11
Salut Noel,
It is already reported here reply #36
I have not found for tscon 1 error 5023, maybe you can help.

12
Thank you for the missing dependencies and the update :great:

13
Plugins / Re: [request] vc++ 2017 runtimes
« on: October 28, 2017, 05:42:19 AM »
You can probably try to edit VcRunTimes plugin by copying VC++ 2015.
For my part, I'm busy next week.

14
Plugins / Re: .NET Framework
« on: October 27, 2017, 10:35:56 AM »
DotNet is not my cup of tea in PE.
but I looked at anyway, the NET Framework Setup InstallPath was not good for 64-bits Net4.x apps.
I corrected it, it should be better for Acrylic Wi-Fi.

I have not tested ShadowExplorer.
My extracted wim folders VHDs are full and I can not enable NetFx3. I have no free time before a little while to rebuild them.

15
Late response, the days are busy currently.
I have the same for Tscon 1 but without knowing what's wrong with 1709
By cons tcpipreg service is running here

16
Win10PE SE HomePage / Re: Korean IME Support for Win10PESE
« on: October 27, 2017, 10:05:53 AM »
Thanks ied206, it is on server  :thumbsup:

17
I updated the ProductPolicy with most features of Windows 10 Fall Creators Update including ReFS.

18
Plugins / Re: Acronis TrueImage 2018 - 2017 - 2016 Update 2
« on: October 19, 2017, 03:58:06 PM »
And use the Button "copy WinPE.zip here"

19
I use indeed kost's ProductPolicyEditor to build the key for PE.
But I did not add FileSystems-ReFs-Enabled in latest Win10PESE release, ReFS seems a bit tricky in 16299.15 
I can not format here, even on fresh VMWare win 10 enterprise 1709 install !
While the same work carefree with 15063.
I did not try by cleaning the disk before. But well, not top, if we need to do manipulations before using format ReFS

20
Win10PE SE HomePage / Re: Logon as Admin - AutoLogin
« on: October 17, 2017, 03:25:35 PM »
Indeed, the command window is displayed with the message "Loading the Administrator session..."
but otherwise it is exactly the same process. So, there is no real need for an additional option.
Of course, there is no worries to use your pecmd ini.

About the Administrator, I still do not really see a real bonus on my side vs the System account.
They both have power rights but not the sames.
Let me know if you have things, apps (TeamViewer) that works with the Administator and not with the System user.

Pages: [1] 2 3 ... 102
Powered by EzPortal