Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - teik

Pages: [1]
1
Win10PE SE HomePage / Driver Local folder
« on: December 11, 2017, 05:43:26 AM »
Hello everyone
I have a version with all the settings and modifications that I like about Win10PE. But I would like to be able to load the drivers of each of my pc's at the beginning.
I would like to be able to integrate them from a folder in the usb that I start to boot.
For example:
usb X: driver / in the root of the usb itself.
So that I can copy them later, since all the applications are compressed in the image boot.wim.

Can you tell me which way to go? Always use the driver integration, but I would like to know if there is the possibility of loading the driver at the start from a preset folder.

Greetings and excuse my ignorance

2
Plugins / Start10 more option
« on: December 05, 2017, 04:22:46 AM »
Hello
First of all apologize for my bad English.
Configuring a bit I have seen two options to the source of this plugin that can be added. I have modified them manually, in case someone from here wants to add them as an adjustment I explain them a little. I do not add it to the plugin, just modify it in the source manually.

Transparent Taskbar:

Code: [Select]
RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,TaskbarAlphaValue,0

0= Total Transparency (Only show icons)

You can make an adjustment to edit the transparency that you want in scale.


In addition you can add a record that does not come in in the plugin. It's to scale the contextual menu and make it a little bigger or smaller as you want.

Scale menu:

Code: [Select]
//- Apply a texture or a background image to the background of the Menu
//ex: RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,BackgroundImage,"X:\Windows\Web\Wallpaper\Windows\img0.jpg"
//ex: RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,FullUITexture,1
If,%WTexture_CheckBox%,Equal,True,Begin
  RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,BackgroundImage,"X:\Windows\Web\Wallpaper\Windows\img0.jpg"
  RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,FullUITexture,1
End

For this:
Code: [Select]
//- Apply a texture or a background image to the background of the Menu
//ex: RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,BackgroundImage,"X:\Windows\Web\Wallpaper\Windows\img0.jpg"
//ex: RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,FullUITexture,1
If,%WTexture_CheckBox%,Equal,True,Begin
  RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,BackgroundImage,"X:\Windows\Web\Wallpaper\Windows\img0.jpg"
  RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,FullUITexture,1
  RegWrite,HKLM,0x1,Tmp_Default\Software\Stardock\Start8\Start8.ini\Start8,UISCALE,137
End

The last line would indicate the scale of the menu.

Example:
137= scale 137%
100= Original

I'm sorry I can not include the plugin setting because I do not have programming knowledge. But I hope you understand the explanation to do it manually.
If any of the great chefs can include it, I will be very grateful.
Greetings to all.

3
Plugins / Genie Backup Home 9.0
« on: November 15, 2017, 02:40:17 AM »
Genie Backup Home 9.0
Comprehensive backup solution for home users
Good morning everyone.
I have made this plugin, but I have a problem.
It works very well, but I am not able to enter the registry as in the new version of the Acronis plugin. So that the key can be entered. IF someone can help me include it. I have the copy of my registry but I do not know how to add that option to the plugin.
If someone wants to add something else as a download button or any other configuration will be welcome.
Thank you all.
https://mega.nz/#!ZVIHQTbQ!ACp4Ul_6XzNTzKy4mnVOBZx-p05M21maViEZ3_BM0_I

4
Questions and Support / Pe Network new version
« on: October 24, 2017, 11:57:46 AM »
Pe Network new version october 2017.
http://penetwork.bplaced.net

I don't know implement.
Regards

5
Questions and Support / Macrium Reflect update
« on: October 11, 2017, 06:52:12 AM »
Macrium reflect new 7.1.

Can someone upload the new version?

regards

6
Questions and Support / Dumppper plug-in
« on: September 01, 2017, 06:03:02 AM »
Good again.
When viewing the new version of Win10PE I decided to create a new ISO again.
The problem is that you want to add this Spanish application: It's called Dumpper and it's portable.

https://sourceforge.net/projects/dumpper/

But you need two more programs as a dependency, so that it can work correctly that these two are:

http://sourceforge.net/projects/dumpper/files/JumpStart%20%2B%20WinPcap.rar/download

- Jumpstart must be installed and executed at boot time, as it is not a portable application.
I create portable applications, but this program is not portable (Jumpstart), needs to be installed and that it is executed at startup.
Could you help me create the Jumpstart plugin?

-Wincap also need to be executed at the beginning, there are one servers but it does not start as installed at the beginning, so it would not work either.

A cordial greeting and excuse my ignorance. I learned here how to do a plugin, but with programs that are portable, that are self-executing, but not with programs that must be installed.

Source http://lampiweb.com/foro/index.php/topic,9525.0.html

7
Questions and Support / Pin Chrome
« on: February 22, 2017, 06:59:00 PM »

Hi
I have read the plugin information and tried many combinations but I can not add chrome to the taskbar. What am I doing wrong? I attach the image with the configuration and the path that I have the program that is the Programs folder.
regards


8
Questions and Support / Partition Guru
« on: February 18, 2017, 12:35:50 PM »
Hi,
It gives me this same error 2 out of 3 times I try it.
regards

EDIT

Deleted: Log

9
Plugins / Plugin Rotation Screen Startup
« on: February 15, 2017, 02:22:46 AM »
It is a plugin to rotate the screen at startup with a delay. I do not know how to make it possible to configure the bat that is next to the executable to change the parameters. So I leave the zip so that who wants to be able to modify the parameter 1 for which it needs and to repress it. It was enough for me to run.
Sorry to be so basic with the plugin but I'm still not very good creating plugin and that is hehe I leave it here if someone wants to perfect it with more options the guide.
regards

10
Research and questions / Install Win10pe in HDD
« on: February 13, 2017, 05:06:50 AM »
Hi
I wish I could install wimpe10 directly on the HDD but I do not know how.
I have the copy of the Target folder of the project. With that I could only copy it to a partition of the disk, but to get me started from the beginning and to recognize it would have to do?
My bios it is UEFI, not have Legacy.
Greetings and excuse my ignorance.  :sad:

11
Win10PE SE HomePage / Rotation Screen
« on: February 07, 2017, 01:44:28 PM »
Hi
I have a tablet where I try, with version 1607 the option to rotate the screen is not. However in previous versions of windows if the option to rotate. Is there any way to make rotation possible? It looks vertical and will not let me use it with a keyboard.
In the capture that I just uploaded you can see that if you give the screen options an error and there is no way to rotate it.
Greetings and thank you very much.




Modify

I just found the Irotate program that helps precisely that. I leave the link below. I just made a portable version of it which weighs very little, but how do you get it to run at startup? I have tried to make a plugin with the creator and I have broken all the configuration and I have had to lower again the whole project.

http://entechtaiwan.com/util/irotate.shtm

regards


12
Win10PE SE HomePage / Remaining watermark
« on: February 05, 2017, 03:42:43 PM »
I use iso 10240 from windows 10. It eliminates all watermarks but leaves this line still on the desktop. I put the sample. The iso I use is in Spanish.
regards



13
Plugins / Command Prompt shorcut
« on: February 04, 2017, 12:50:10 PM »
Hi.
Could you put a shortcut to change the entry in the menu? That is done automatically in English.
Thank you very much.

14
Plugins / Notepad create 2 Shortcut
« on: February 04, 2017, 09:00:09 AM »
The second post in this section, I hope not to bother. When active Notepad, either from components or yomi plugins, this application creates two entries: One with the Shortcut that I write, but another entry in the menu automatically called Accesories. Why is this post created in English?
Thank you very much for the help.

15
Plugins / Unlocker 1.9.2 Shortcut
« on: February 04, 2017, 06:04:51 AM »
Good
I used to use the program called Unlocker very often and when I saw that it was inside "Yomi" I lacked time to download it, but I was disappointed that I could not put the "Shorcourt" "StartMenu" to translate the menu entry and not appear in English .
Can anyone help me with this?
Thank you so much for everything.

Originall
Quote
Buenas
Suelo utilizar muy amenudo el programa llamado Unlocker y cuando vi que estaba dentro de "Yomi" me falto tiempo para descargarlo, pero me desilusionó que no pudiera poner el "Shorcourt" "StartMenu" pra traducir la entrada del menu y que no apareciera en ingles.
Puede alguien ayudarme a esto?
Muchas gracias por todo.

16
Win10PE SE HomePage / In the boot Said: loading files...
« on: February 04, 2017, 05:42:47 AM »
First of all, congratulations on the huge work, I have loved this site since I met him in December of last year. Now that I start to control the tool well, I'd like to say one thing I've seen. It's not a mistake, it's just a little translation thing.
When the system in the usb boots, it says: "Loading Files" always, but I am Spanish and should put "Cargando archivos ..." Then also says "Please, waiting ..." in English and for those we have Everything in Spanish is a bit disconcerting that some things continue to come out in another language.
It is not a fault, on the contrary, but I would like to ask if these two data could be translated, for example, into Spanish, so that the whole system is tacit. The rest is all in Spanish.
I apologize for the inconvenience caused and for my bad English, is the translator.  :thumbsup:

Original
Quote
Antes de nada felicitar por el enorme trabajo, adoro este sitio desde que lo conocí en diciembre del año pasado. Ahora que empiezo a controlar bien la herramienta, me gustaría decir una cosa que he visto. No es un error solo es una pequeña cosa de traduccion.
Cuando el sistema en el usb arranca, dice: "Loading Files" siempre, pero yo soy español y debería de poner "Cargando archivos..." Después también dice: "Please, waiting..." en ingles y para los que tenemos todo  en español es un poco desconcertante que algunas cosas sigan saliendo en otro idioma.
No es un fallo, al contrario, pero me gustaría pedir que si esos dos datos se puedieran traducir por ejemplo al español para que todo el sistema se encuentre taducido. El resto esta todo en español.
Pido disculpas por las molestias ocasionads y por mi mal ingles, es del traductor.

Pages: [1]
Powered by EzPortal