Topic: Disk imagers in PE/SE: Basic build info - Comparison - News  (Read 53355 times)

0 Members and 1 Guest are viewing this topic.

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #20 on: January 07, 2015, 10:33:30 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 07:51:59 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #21 on: January 08, 2015, 08:34:36 AM »

JFX

  • Moderator, Code Baker
  • Sr. Chef
  • *****
  • Date Registered: Dec 2010
  • Posts: 889
For command line user ShadowProtect can be reduces to just 2 files.
SbRun.exe and stcsnap.dll (or stcsna64.dll if you use x64 version)

That makes ShadowProtect winning, with fastest restore time and smallest program size :grin:
« Last Edit: January 08, 2015, 08:44:00 AM by JFX »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #22 on: January 08, 2015, 09:08:59 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 07:52:21 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #23 on: January 08, 2015, 08:59:20 PM »

JFX

  • Moderator, Code Baker
  • Sr. Chef
  • *****
  • Date Registered: Dec 2010
  • Posts: 889
Yes, I use ShadowProtect myself. The command line is a bit uneasy, but the GUI version display the command line for the used task.
So the only problem is that it want a volume name (the one you can get from mountvol.exe) and not a simple drive letter.

Actually the lack of command line support in Acronis pushed me to change to StorageCraft.

Not sure what's your problem with Aomei Backupper?
Works here, copied the 3 .sys in system32 and run Loaddrv.exe.

Loaddrv writes this UpperFilters value and Backupper the other 2.
What happens if you run the setup inside PE?

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #24 on: January 09, 2015, 02:33:21 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 07:52:38 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #25 on: January 09, 2015, 03:01:18 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 07:52:53 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #26 on: January 09, 2015, 08:14:21 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 07:53:14 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #27 on: January 09, 2015, 08:51:55 AM »

JFX

  • Moderator, Code Baker
  • Sr. Chef
  • *****
  • Date Registered: Dec 2010
  • Posts: 889
Just wait what Aomei support says about registration of a freeware  :confused:

Don't know if I install it in WinPE x64, system get's instable  :blink:
« Last Edit: January 09, 2015, 08:52:09 AM by JFX »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #28 on: January 09, 2015, 08:58:34 AM »

SIW2

  • Code Baker
  • Chef
  • ***
  • Date Registered: Jul 2012
  • Posts: 174
Where did you get 64bit LoadDrv.exe ? I haven't got one of those in Backupper.


Not sure why you are having difficulty.

I copy the 3 sys files to mount\system32 ( or Target\system32 - whatever you are using for that ), and the contents of the AOMEI\WINPE64 folder to mount\program files\aomei.

I also copy amcore.dll from AOMEI folder to  mount\program files\aomei. Just a small reg entry. Job done.

Code: [Select]
[HKEY_LOCAL_MACHINE\PE_SYS\ControlSet001\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}]
"UpperFilters"=hex(7):61,00,6d,00,62,00,61,00,6b,00,64,00,72,00,76,00,00,00,00,\
  00

[HKEY_LOCAL_MACHINE\PE_SYS\ControlSet001\Services]

[HKEY_LOCAL_MACHINE\PE_SYS\ControlSet001\Services\ambakdrv]
"DisplayName"="ambakdrv"
"ErrorControl"=dword:00000000
"ImagePath"=hex(2):5c,00,3f,00,3f,00,5c,00,58,00,3a,00,5c,00,77,00,69,00,6e,00,\
  64,00,6f,00,77,00,73,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,\
  00,5c,00,61,00,6d,00,62,00,61,00,6b,00,64,00,72,00,76,00,2e,00,73,00,79,00,\
  73,00,00,00
"Start"=dword:00000002
"Type"=dword:00000001
« Last Edit: January 09, 2015, 09:07:24 AM by SIW2 »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #29 on: January 09, 2015, 09:25:51 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 10:41:52 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #30 on: January 09, 2015, 09:45:24 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
Just trying to learn here...  :embarrassed:
« Last Edit: February 18, 2017, 10:42:00 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #31 on: January 09, 2015, 10:00:06 AM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 10:42:13 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #32 on: January 09, 2015, 01:08:40 PM »

SIW2

  • Code Baker
  • Chef
  • ***
  • Date Registered: Jul 2012
  • Posts: 174
Yes , I expect you could use similar to create the service for Aomei. Haven't needed to try it though.

Code: [Select]
Reg.exe add "HKLM\PE_SYS\ControlSet001\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}" /v "UpperFilters" /t REG_MULTI_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "DisplayName" /t REG_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "ErrorControl" /t REG_DWORD /d "0" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "ImagePath" /t REG_EXPAND_SZ /d "\??\X:\windows\system32\ambakdrv.sys" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "Start" /t REG_DWORD /d "2" /f
Reg.exe add "HKLM\PE_SYS\ControlSet001\Services\ambakdrv" /v "Type" /t REG_DWORD /d "1" /f
« Last Edit: January 09, 2015, 01:13:00 PM by SIW2 »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #33 on: January 09, 2015, 06:40:16 PM »

gbrao

  • Chef
  • ***
  • Date Registered: Sep 2011
  • Posts: 193
Yes, I use ShadowProtect myself. The command line is a bit uneasy, but the GUI version display the command line for the used task.
So the only problem is that it want a volume name (the one you can get from mountvol.exe) and not a simple drive letter.

Could you please share one of the SProtect cmd/scripts (as an example) ?

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #34 on: January 09, 2015, 08:11:35 PM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 10:42:31 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #35 on: January 09, 2015, 08:36:54 PM »

SIW2

  • Code Baker
  • Chef
  • ***
  • Date Registered: Jul 2012
  • Posts: 174
You don't need msahci.sys. Not sure why it is there - maybe for pe2.

demand is start type 3
auto is start type 2

sc create ambakdrv  type= kernel start= auto binpath= "system32\ambakdrv.sys"
net start ambakdrv
« Last Edit: January 09, 2015, 08:51:25 PM by SIW2 »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #36 on: January 09, 2015, 09:02:24 PM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 10:42:43 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #37 on: January 09, 2015, 09:26:47 PM »

SIW2

  • Code Baker
  • Chef
  • ***
  • Date Registered: Jul 2012
  • Posts: 174
I wouldn't put msahci in, it is the win7 version. Win8 already has it ( so does 7 so no idea what it is doing there).

You don't need to start the other linked drivers. Backupper will do that as soon as you fire it up.

Don't worry about the message, it works perfectly. You can test by mounting an .adi image.

If you want to get really fancy, you can copy adi.ico to Program Files\aomei as well and it makes the .adi images look pretty.

Code: [Select]
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File\DefaultIcon" /ve /t REG_SZ /d "X:\Program Files\AOMEI\adi.ico" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.adi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.afi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f

« Last Edit: January 09, 2015, 09:28:01 PM by SIW2 »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #38 on: January 09, 2015, 09:50:32 PM »

Atari800xl

  • Code Baker
  • Sr. Chef
  • ****
  • Date Registered: Feb 2013
  • Posts: 784
...
« Last Edit: February 18, 2017, 10:42:56 PM by Atari800xl »

Re: Disk imagers in PE/SE: Basic build info - Comparison - News
« Reply #39 on: January 09, 2015, 10:10:35 PM »

SIW2

  • Code Baker
  • Chef
  • ***
  • Date Registered: Jul 2012
  • Posts: 174
It works for me:

Code: [Select]
@Echo Off
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\AOMEI Backupper Backup File\DefaultIcon" /ve /t REG_SZ /d "X:\Program Files\AOMEI\adi.ico" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.adi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f
Reg.exe add "HKLM\SOFTWARE\Classes\.afi" /ve /t REG_SZ /d "AOMEI Backupper Backup File" /f

Reg.exe add "HKLM\SYSTEM\ControlSet001\Control\Class\{71a27cdd-812a-11d0-bec7-08002be2092f}" /v "UpperFilters" /t REG_MULTI_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "DisplayName" /t REG_SZ /d "ambakdrv" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "ErrorControl" /t REG_DWORD /d "0" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "ImagePath" /t REG_EXPAND_SZ /d "\??\X:\windows\system32\ambakdrv.sys" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "Start" /t REG_DWORD /d "2" /f
Reg.exe add "HKLM\SYSTEM\ControlSet001\Services\ambakdrv" /v "Type" /t REG_DWORD /d "1" /f

sc create ambakdrv  type= kernel start= auto binpath= "system32\ambakdrv.sys"
net start ambakdrv
PAUSE

 

Powered by EzPortal